Influence of laser beam profiles on the frequency bandwidth of laser-generated surface acoustic waves
http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6928267
Influence of laser beam profiles on the frequency bandwidth of laser-generated surface acoustic waves
The frequency characteristics of laser-generated surface acoustic waves (SAWs) were investigated depending on laser beam profiles. The laser-generated SAWs were analytically and experimentally compared when using the single-line laser beams of Gaussian and square-like energy profiles. Also, the line-arrayed laser beam in the square-like energy distribution was introduced to generate the SAW that had a narrow frequency bandwidth. The results from both the experiments and the simulations showed the similar distinction of the frequency characteristics in between using Gaussian and square-like laser energy profiles. The SAW by the Gaussian laser beam showed only single peak in the frequency spectrum, whereas the odd harmonic frequency components appeared in the case of using the square-like laser beams. Moreover, the SAW by the line-arrayed laser beam had narrower frequency bandwidth than the SAW by the single-line laser beam. These results were in good agreement with the theoretical predictions, which supports that laser-generated SAWs have the advantage of frequency modulation by modifying the spatial energy profile of a laser beam.
Published in:
Nondestructive Evaluation/Testing (FENDT), 2014 IEEE Far East Forum onDate of Conference:
20-23 June 2014- Page(s):
- 221 - 224
- Print ISBN:
- 978-1-4799-4731-7
- INSPEC Accession Number:
- 14694393
- Conference Location :
- Chengdu
- DOI:
- 10.1109/FENDT.2014.6928267
- Publisher:
- IEEE
-
Full-range stress–strain curve estimation of aluminum alloys using machine learning-aided ultrasound
Date2024.03.19 CategoryInternational Views29 -
Nondestructive Inspection of Directed Energy Deposited Components Using Scanning Acoustic Microscopy with Metalworking Fluids
Date2024.03.19 CategoryInternational Views25 -
Nondestructive Inspection of Cylindrical Components Repaired Via Directed Energy Deposition Using Scanning Acoustic Microscopy with Metal Lubricants
Date2024.03.19 CategoryInternational Views175 -
Plastic properties estimation of aluminum alloys using machine learning of ultrasonic and eddy current data
Date2024.03.19 CategoryInternational Views61 -
Calibration method using a narrowband signal for measurement of the acoustic nonlinearity parameter
Date2024.03.19 CategoryInternational Views28 -
Comparisons of second- and third-order ultrasonic nonlinearity parameters measured using through-transmission and pulse-echo methods
Date2022.11.15 CategoryInternational Views2466 -
In-situ and Layer-by-layer Grain Size Estimation of Additively Manufactured Metal Components using Femtosecond Laser Ultrasonic Technique (Submitted)
Date2022.02.21 CategoryInternational Views952 -
Microstructural Characterization of Additively Manufactured Metal Components Using Linear and Nonlinear Ultrasonic Techniques
Date2022.02.21 CategoryInternational Views1272 -
Tensile properties evaluation of additively manufactured Ti-6Al-4V/yttria-stabilized zirconia composite using absolute nonlinear-ultrasonic technique (Submitted)
Date2022.02.21 CategoryInternational Views12459 -
Generation and Measurement of Gigahertz Ultrasonic Waves in Additively Manufactured Thin Metal Components using Femtosecond Laser and Application to In-situ Grain size Monitoring (Submitted)
Date2022.02.21 CategoryInternational Views26195 -
Porosity evaluation of additive manufactured parts: ultrasonic testing and eddy current testing
Date2021.08.25 CategoryDomestic Views124148 -
Nondestructive evaluation of micro-oxide inclusions in additively manufactured metal parts using nonlinear ultrasonic technique
Date2021.08.25 CategoryInternational Views20075 -
Mechanical properties estimation of additively manufactured metal components using femtosecond laser ultrasonics and laser polishing
Date2021.08.25 CategoryInternational Views28917 -
Experimental Verification of Contact Acoustic Nonlinearity at Rough Contact Interfaces
Date2021.08.25 CategoryInternational Views49926 -
Compensation of a Second Harmonic Wave Included in an Incident Ultrasonic Wave for the Precise Measurement of the Acoustic Nonlinearity Parameter
Date2021.08.25 CategoryInternational Views45544 -
Measurement of Absolute Acoustic Nonlinearity Parameter Using Laser-Ultrasonic Detection
Date2021.08.25 CategoryInternational Views43154 -
Rapid Molecular Diagnostic Sensor Based on Ball-Lensed Optical Fibers
Date2021.08.25 CategoryInternational Views36377 -
Porosity Evaluation of Additively Manufactured Components Using Deep Learning‑based Ultrasonic Nondestructive Testing (Editor's pick)
Date2021.08.25 CategoryInternational Views12108 -
Deep Learning-Based Ultrasonic Testing to Evaluate the Porosity of Additively Manufactured Parts with Rough Surfaces
Date2021.08.25 CategoryInternational Views21444 -
Analysis of the influence of surface roughness on measurement of ultrasonic nonlinearity parameter using contact-type transducer
Date2021.08.25 CategoryInternational Views505112