Influence of repetitive pulsed laser irradiation on the surface characteristics of an aluminum alloy in the melting regime
http://link.springer.com/article/10.1007%2Fs12206-014-1131-1
Influence of repetitive pulsed laser irradiation on the surface characteristics of an aluminum alloy in the melting regime
Abstract
We have investigated the influence of repetitive near-infrared (NIR) pulsed laser shots in the melting regime on the surface characteristics of an aluminum 6061-T6 alloy. Characteristics of interest include surface morphology, surface roughness, and surface hardness in the melted zone as well as the size of the melted zone. For this study, the proper pulse energy for inducing surface melting at one shot is selected using numerical simulations that calculate the variation in temperature at the laser beam spot for various input pulse energies in order to find the proper pulse energy for raising the temperature to the melting point. In this study, 130 mJ was selected as the input energy for a Nd:YAG laser pulse with a duration of 5 ns. The size of the melted zone measured using optical microscopy (OM) increased logarithmically with an increasing shot number. The surface morphology observed by scanning electron microscopy (SEM) clearly showed a re-solidified microstructure evolution after surface melting. The surface roughness and hardness were measured by atomic force microscopy (AFM) and nano-indentation, respectively. The surface roughness showed almost no variation due to the surface texturing after laser shots over 10. The hardness inside the melted zone was lower than that outside the zone because the β″ phase was transformed to a β phase or dissolved into a matrix.
Keywords
Near-infrared pulsed laser Aluminum alloy Melting Surface morphology Surface roughness Surface hardness-
Full-range stress–strain curve estimation of aluminum alloys using machine learning-aided ultrasound
Date2024.03.19 CategoryInternational Views10 -
Nondestructive Inspection of Directed Energy Deposited Components Using Scanning Acoustic Microscopy with Metalworking Fluids
Date2024.03.19 CategoryInternational Views5 -
Nondestructive Inspection of Cylindrical Components Repaired Via Directed Energy Deposition Using Scanning Acoustic Microscopy with Metal Lubricants
Date2024.03.19 CategoryInternational Views41 -
Plastic properties estimation of aluminum alloys using machine learning of ultrasonic and eddy current data
Date2024.03.19 CategoryInternational Views13 -
Calibration method using a narrowband signal for measurement of the acoustic nonlinearity parameter
Date2024.03.19 CategoryInternational Views11 -
2022.11 한국비파괴검사학회 2022 추계학술대회 우수논문발표상 (유지웅, 송동기, 장경영)
Date2022.11.24 CategoryAward Views545 -
2021.12 한국비파괴검사학회 2021 추계학술대회 우수논문발표상 (한희진, 장경영)
Date2022.11.24 CategoryAward Views449 -
2021.12 한국비파괴검사학회 2021 추계학술대회 우수논문발표상 (방성준, 송동기, 장경영)
Date2022.11.24 CategoryAward Views425 -
Comparisons of second- and third-order ultrasonic nonlinearity parameters measured using through-transmission and pulse-echo methods
Date2022.11.15 CategoryInternational Views2451 -
IJPEM-GT 저널지 편집장 우수논문 선정 (박성현)
Date2022.04.04 CategoryAward Views785 -
2022 산업과학연구소 우수논문상 (박성현)
Date2022.02.21 CategoryAward Views692 -
In-situ and Layer-by-layer Grain Size Estimation of Additively Manufactured Metal Components using Femtosecond Laser Ultrasonic Technique (Submitted)
Date2022.02.21 CategoryInternational Views943 -
Microstructural Characterization of Additively Manufactured Metal Components Using Linear and Nonlinear Ultrasonic Techniques
Date2022.02.21 CategoryInternational Views1259 -
Tensile properties evaluation of additively manufactured Ti-6Al-4V/yttria-stabilized zirconia composite using absolute nonlinear-ultrasonic technique (Submitted)
Date2022.02.21 CategoryInternational Views12427 -
Generation and Measurement of Gigahertz Ultrasonic Waves in Additively Manufactured Thin Metal Components using Femtosecond Laser and Application to In-situ Grain size Monitoring (Submitted)
Date2022.02.21 CategoryInternational Views25854 -
Porosity evaluation of additive manufactured parts: ultrasonic testing and eddy current testing
Date2021.08.25 CategoryDomestic Views123922 -
Nondestructive evaluation of micro-oxide inclusions in additively manufactured metal parts using nonlinear ultrasonic technique
Date2021.08.25 CategoryInternational Views20021 -
Mechanical properties estimation of additively manufactured metal components using femtosecond laser ultrasonics and laser polishing
Date2021.08.25 CategoryInternational Views28880 -
Experimental Verification of Contact Acoustic Nonlinearity at Rough Contact Interfaces
Date2021.08.25 CategoryInternational Views49846 -
Compensation of a Second Harmonic Wave Included in an Incident Ultrasonic Wave for the Precise Measurement of the Acoustic Nonlinearity Parameter
Date2021.08.25 CategoryInternational Views45478 -
Measurement of Absolute Acoustic Nonlinearity Parameter Using Laser-Ultrasonic Detection
Date2021.08.25 CategoryInternational Views42994 -
Rapid Molecular Diagnostic Sensor Based on Ball-Lensed Optical Fibers
Date2021.08.25 CategoryInternational Views36292 -
Porosity Evaluation of Additively Manufactured Components Using Deep Learning‑based Ultrasonic Nondestructive Testing (Editor's pick)
Date2021.08.25 CategoryInternational Views12090 -
Deep Learning-Based Ultrasonic Testing to Evaluate the Porosity of Additively Manufactured Parts with Rough Surfaces
Date2021.08.25 CategoryInternational Views21372 -
Analysis of the influence of surface roughness on measurement of ultrasonic nonlinearity parameter using contact-type transducer
Date2021.08.25 CategoryInternational Views503741 -
Indirect Method for Measuring Absolute Acoustic Nonlinearity Parameter Using Surface Acoustic Waves with a Fully Non-Contact Laser-Ultrasonic Technique
Date2021.08.25 CategoryInternational Views31675 -
Evaluation of yield strength by ultrasonic reconstruction of quadratic nonlinear Stress-Strain curve
Date2021.08.25 CategoryInternational Views65922 -
Ultrasonic nonlinearity parameter in uniaxial stress condition
Date2021.08.25 CategoryInternational Views42891 -
Applicability of nonlinear ultrasonic technique to evaluation of thermally aged CF8M cast stainless steel
Date2021.08.25 CategoryInternational Views6990 -
2021.07 한국비파괴검사학회 2021 춘계학술대회 우수논문발표상 (유지웅, 송동기, 장경영)
Date2021.07.20 CategoryAward Views2208 -
2021.07 한국비파괴검사학회 2021 춘계학술대회 우수논문발표상 (송동기, 장경영)
Date2021.07.20 CategoryAward Views661 -
2020.06 한국비파괴검사학회 비파괴검사학회지 우수논문상 / 2020.07 한국과학기술단체총연합회 과학기술우수논문상 (최성호,김상민,장경영)
Date2020.09.28 CategoryAward Views10742 -
2019.11 한국비파괴검사학회 2019 추계학술대회 우수논문발표상 (박성현, 홍정연, 최성호, 장경영)
Date2020.01.06 CategoryAward Views19532 -
2019.07 한국비파괴검사학회 2019 춘계학술대회 우수논문발표상 (송동기, 류주영, 홍정연, 최성호, 장경영)
Date2020.01.06 CategoryAward Views20729 -
2019.07 한국비파괴검사학회 2019 춘계학술대회 우수논문발표상 (박성현, 심명종, 최성호, 장경영)
Date2020.01.06 CategoryAward Views23050 -
Nondestructive Evaluation of Thermal Aging in Al6061 Alloy by measuring Acoustic Nonlinearity of Laser-generated Surface Acoustic Waves
Date2020.01.06 CategoryInternational Views66309 -
Stress estimation using the acoustoelastic effect of surface waves in weak anisotropic materials
Date2020.01.06 CategoryInternational Views85889 -
Comparison of Linear and Nonlinear Ultrasonic Parameters in Characterizing Grain Size and Mechanical Properties of 304L Stainless Steel
Date2020.01.06 CategoryInternational Views30995 -
Imaging and Sizing of Surface Defects Using Synthetic Aperture Focusing of Laser-generated Surface Waves
Date2020.01.06 CategoryDomestic Views34889 -
2018 산업통상자원부장관 위촉장
Date2019.06.10 CategoryAward Views29360 -
2018.11 비파괴학회 우수포스터상 (이영진,박기태,김종범,김창수,장경영)
Date2018.11.29 CategoryAward Views32347 -
2018.11 비파괴학회 우수논문발표상 (김창수,김종범,송동기,장경영)
Date2018.11.29 CategoryAward Views85638 -
Internal defect detection using laser-generated longitudinal waves in ablation regime
Date2018.11.29 CategoryInternational Views108770 -
Synthetic aperture imaging of contact acoustic nonlinearity to visualize the closing interfaces using tone-burst ultrasonic waves
Date2018.11.28 CategoryInternational Views87623 -
Variation of Acoustoelastic Effect in Al6061-T6 according to Heat Treatment Time
Date2018.11.28 CategoryDomestic Views62359 -
Dependence of Nonlinear Ultrasonic Characteristic on Second-Phase Precipitation in Heat-Treated Al 6061-T6 alloy
Date2018.11.28 CategoryInternational Views74032 -
Relative Measurement of the Acoustic Nonlinearity Parameter using Laser Detection of an Ultrasonic Wave
Date2018.06.14 CategoryInternational Views100055 -
A Method to Estimate the Absolute Ultrasonic Nonlinearity Parameter from Relative Measurements
Date2018.06.14 CategoryInternational Views86767 -
Finite element analysis of a low-velocity impact test for glass fiber-reinforced polypropylene composites considering mixed-mode interlaminar fracture toughness
Date2018.06.14 CategoryInternational Views99074 -
2017년 비파괴검사학회지 우수논문발표상 (하홍필, 김종범, 장경영)
Date2018.02.01 CategoryAward Views50041 -
2017 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 전지현 (박사과정)
Date2017.03.23 CategoryAward Views61920 -
2017 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 서호건 (박사과정)
Date2017.03.23 CategoryAward Views64618 -
2016년 비파괴검사학회지 우수논문발표상 (박성현, 김종범, 이주호, 장경영)
Date2017.02.28 CategoryAward Views65761 -
Assessment of Thermal Degradation by Cumulative Variation of Ultrasonic Nonlinear Parameter
Date2017.01.16 CategoryInternational Views207517 -
Assessment of Thermal Aging of Aluminum Alloys by Acoustic Nonlinearity Measurement of Surface Acoustic Waves
Date2017.01.16 CategoryInternational Views124048 -
Absolute Measurement and Relative Measurement of Ultrasonic Nonlinear Parameter
Date2017.01.16 CategoryInternational Views302765 -
Experimental Comparison of Nonlinear Parameters Obtained from Absolute Measurement and Relative Measurement
Date2017.01.16 CategoryInternational Views167855 -
Comparison of Ultrasonic Nonlinear Parameters Measured by PZT and LiNbO3 Transducers
Date2017.01.16 CategoryInternational Views140132 -
KSME-SEMES 오픈 이노베이션 챌린지 동상 수상 - 윤성희
Date2016.12.21 CategoryAward Views69532 -
2016 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 전지현 (석박사통합과정)
Date2016.09.09 CategoryAward Views67070 -
2016 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 서호건 (박사과정)
Date2016.04.09 CategoryAward Views65094 -
JMST - JMST Contribution Award
Date2016.02.23 CategoryAward Views66218 -
Nanotribological and wetting performance of hierarchical patterns
Date2016.02.23 CategoryInternational Views123403 -
2015 산업부장관 표창
Date2015.12.08 CategoryAward Views67600 -
Demonstration of Disturbance Propagation and Amplification in Car-Following Situation for Enhancement of Vehicle Platoon System
Date2015.09.16 CategoryInternational Views147462 -
Relative Measurement of Acoustic Nonlinear Parameters and Comparison of Sensitivity to Thermal Aging
Date2015.09.16 CategoryInternational Views117490 -
Non-contact Measurement of Elastic Modulus by using Laser Ultrasonic
Date2015.09.16 CategoryInternational Views231784 -
Relationship between Second- and Third-order Acoustic Nonlinear Parameters in Relative Measurement
Date2015.09.16 CategoryInternational Views138433 -
Non-Contact Evaluation of Acoustic Nonlinearity of a Laser-Generated Surface Wave in a Plastically Deformed Aluminum Alloy
Date2015.09.16 CategoryInternational Views159949 -
Influence of repetitive pulsed laser irradiation on the surface characteristics of an aluminum alloy in the melting regime
Date2015.09.16 CategoryInternational Views279908 -
Real-time detection of surface cracks on silicon wafers during laser beam irradiation
Date2015.09.16 CategoryInternational Views249344 -
High power CW laser-induced damage of CMOS image sensor
Date2015.09.16 CategoryDomestic Views97753 -
Measurement of Ultrasonic Nonlinear Parameter by Using Non-Contact Ultrasonic Receiver
Date2015.09.16 CategoryDomestic Views96816 -
Study on the Nonlinear Electromagnetic Acoustic Resonance Method for the Evaluation of Hidden Damage in a Metallic Material
Date2015.09.16 CategoryDomestic Views95802 -
Influence of laser beam profiles on the frequency bandwidth of laser-generated surface acoustic waves
Date2015.09.16 CategoryInternational Views121690 -
Laser ultrasonic inspection in ablation regime
Date2015.09.16 CategoryInternational Views132339 -
Improvement of Crack Sizing Performance by using Nonlinear Ultrasonic Technique
Date2015.09.16 CategoryInternational Views104059 -
대한기계학회 - 우수 학생 논문상
Date2015.09.16 CategoryAward Views66689 -
비파괴검사학회지 - 우수논문상
Date2015.09.15 CategoryAward Views67781 -
한국도로공사 교통데이터 공모전 - 대한교통학회 회장상 수상 (김진수)
Date2014.10.15 CategoryAward Views114433 -
In-Line Ultrasonic Monitoring for Sediments Stuck on Inner Wall of a Polyvinyl Chloride Pipe
Date2014.09.29 CategoryInternational Views129216 -
In situ detection of laser-induced slip initiation on the silicon wafer surface
Date2014.09.29 CategoryInternational Views104256 -
Initiation time of near-infrared laser-induced slip on the surface of silicon wafers
Date2014.09.29 CategoryInternational Views112226 -
Evaluation of Ultrasonic Nonlinear Characteristics in Artificially Aged Al6061-T6
Date2014.09.29 CategoryDomestic Views121811 -
Simulations for Internal Defect Inspection using Laser Generated Ultrasonic Wave in Ablation Regime
Date2014.09.29 CategoryDomestic Views128079 -
Slip damage of silicon wafers subjected to continuous infrared laser irradiation
Date2014.09.29 CategoryInternational Views105396 -
Thermal damages on the surface of a silicon wafer induced by a near-infrared laser
Date2014.09.29 CategoryInternational Views637024 -
Feasibility of MFC (Macro-Fiber Composite) Transducers for Guided Wave Technique
Date2014.09.29 CategoryDomestic Views222065 -
Initial Second Harmonic Generation in Narrowband Surface Waves by Multi-Line Laser Beams for Two Kinds of Spatial Energy Profile Models
Date2014.09.29 CategoryDomestic Views125699 -
Evaluation of Ultrasonic Nonlinear Characteristics in Heat-Treated Aluminum Alloy
Date2014.09.29 CategoryDomestic Views118625 -
A6061 합금의 석출경화 열처리에 따른 탄성파의 음향 특성 연구
Date2014.09.29 CategoryDomestic Views124296 -
비파괴검사학회지 - 우수 논문상
Date2014.09.29 CategoryAward Views71609 -
한국ITS학회 - 우수논문상
Date2014.09.29 CategoryAward Views77759 -
Crack Detection in Single-Crystalline Silicon Wafer Using Laser Generated Lamb Wave
Date2014.03.05 CategoryInternational Views139239 -
Evaluation of Ultrasonic Nonlinear Characteristics in Heat-Treated Aluminum Alloy (Al-Mg-Si-Cu)
Date2014.03.05 CategoryInternational Views191728 -
Application of Macrofiber Composite for Smart Transducer of Lamb Wave Inspection
Date2014.03.05 CategoryInternational Views106244 -
Thermal Damage Characterization of Silicon Wafer Subjected to CW Laser Beam
Date2014.03.05 CategoryDomestic Views104286 -
Imaging of contact acoustic nonlinearity using synthetic aperture technique
Date2014.03.05 CategoryInternational Views120624 -
Feasibility of MFC (Macro-Fiber Composite) Transducers for Guided Wave Technique
Date2014.03.05 CategoryDomestic Views111613 -
Initial Second Harmonic Generation in Narrowband Surface Waves by Multi-Line Laser Beams for Two Kinds of Spatial Energy Profile
Date2014.03.05 CategoryDomestic Views131680