Slip damage of silicon wafers subjected to continuous infrared laser irradiation
http://www.sciencedirect.com/science/article/pii/S1567173914001072
Volume 14, Issue 6, June 2014, Pages 843–849
Slip damage of silicon wafers subjected to continuous infrared laser irradiation
Highlights
- •
We investigate the laser irradiance inducing slip damage in a silicon wafer.
- •
We develop a simulation model to predict the slip damage.
- •
The model calculates the resolved shear stress and the temperature.
- •
The slipping irradiance predicted by simulation agrees well with the experiments.
Abstract
Laser irradiation can cause damage to solids, such as slipping, cracking, melting, and ablation. Silicon crystals are brittle, so slipping is a serious problem because it can easily result in fracture. This study investigates the amount of continuous near-infrared (NIR) laser irradiance that induces slip damage in a single-crystal silicon wafer. For this purpose we developed a simulation model based on heat transfer and thermo-elastic analyses. To verify the simulation model, silicon wafer specimens were irradiated by a fiber laser beam (of wavelength 1065 nm), and the surface morphology after laser beam irradiation was inspected using optical microscopy (OM). The irradiation time was fixed at 10 s, and nine different irradiances from 180 W/cm2 to 380 W/cm2 were tested in steps of 25 W/cm2. No slip surface was found after exposure to the irradiances up to 230 W/cm2, but straight slips in the <110> direction appeared at the irradiances of 255 W/cm2 and above. These experimental findings agreed well with the simulation.
Keywords
- Infrared laser;
- Silicon wafer;
- Thermal stress;
- Slip damage
-
Full-range stress–strain curve estimation of aluminum alloys using machine learning-aided ultrasound
Date2024.03.19 CategoryInternational Views23 -
Nondestructive Inspection of Directed Energy Deposited Components Using Scanning Acoustic Microscopy with Metalworking Fluids
Date2024.03.19 CategoryInternational Views18 -
Nondestructive Inspection of Cylindrical Components Repaired Via Directed Energy Deposition Using Scanning Acoustic Microscopy with Metal Lubricants
Date2024.03.19 CategoryInternational Views145 -
Plastic properties estimation of aluminum alloys using machine learning of ultrasonic and eddy current data
Date2024.03.19 CategoryInternational Views44 -
Calibration method using a narrowband signal for measurement of the acoustic nonlinearity parameter
Date2024.03.19 CategoryInternational Views22 -
2022.11 한국비파괴검사학회 2022 추계학술대회 우수논문발표상 (유지웅, 송동기, 장경영)
Date2022.11.24 CategoryAward Views554 -
2021.12 한국비파괴검사학회 2021 추계학술대회 우수논문발표상 (한희진, 장경영)
Date2022.11.24 CategoryAward Views458 -
2021.12 한국비파괴검사학회 2021 추계학술대회 우수논문발표상 (방성준, 송동기, 장경영)
Date2022.11.24 CategoryAward Views435 -
Comparisons of second- and third-order ultrasonic nonlinearity parameters measured using through-transmission and pulse-echo methods
Date2022.11.15 CategoryInternational Views2463 -
IJPEM-GT 저널지 편집장 우수논문 선정 (박성현)
Date2022.04.04 CategoryAward Views796 -
2022 산업과학연구소 우수논문상 (박성현)
Date2022.02.21 CategoryAward Views701 -
In-situ and Layer-by-layer Grain Size Estimation of Additively Manufactured Metal Components using Femtosecond Laser Ultrasonic Technique (Submitted)
Date2022.02.21 CategoryInternational Views951 -
Microstructural Characterization of Additively Manufactured Metal Components Using Linear and Nonlinear Ultrasonic Techniques
Date2022.02.21 CategoryInternational Views1270 -
Tensile properties evaluation of additively manufactured Ti-6Al-4V/yttria-stabilized zirconia composite using absolute nonlinear-ultrasonic technique (Submitted)
Date2022.02.21 CategoryInternational Views12455 -
Generation and Measurement of Gigahertz Ultrasonic Waves in Additively Manufactured Thin Metal Components using Femtosecond Laser and Application to In-situ Grain size Monitoring (Submitted)
Date2022.02.21 CategoryInternational Views26189 -
Porosity evaluation of additive manufactured parts: ultrasonic testing and eddy current testing
Date2021.08.25 CategoryDomestic Views124090 -
Nondestructive evaluation of micro-oxide inclusions in additively manufactured metal parts using nonlinear ultrasonic technique
Date2021.08.25 CategoryInternational Views20068 -
Mechanical properties estimation of additively manufactured metal components using femtosecond laser ultrasonics and laser polishing
Date2021.08.25 CategoryInternational Views28912 -
Experimental Verification of Contact Acoustic Nonlinearity at Rough Contact Interfaces
Date2021.08.25 CategoryInternational Views49900 -
Compensation of a Second Harmonic Wave Included in an Incident Ultrasonic Wave for the Precise Measurement of the Acoustic Nonlinearity Parameter
Date2021.08.25 CategoryInternational Views45527 -
Measurement of Absolute Acoustic Nonlinearity Parameter Using Laser-Ultrasonic Detection
Date2021.08.25 CategoryInternational Views43106 -
Rapid Molecular Diagnostic Sensor Based on Ball-Lensed Optical Fibers
Date2021.08.25 CategoryInternational Views36361 -
Porosity Evaluation of Additively Manufactured Components Using Deep Learning‑based Ultrasonic Nondestructive Testing (Editor's pick)
Date2021.08.25 CategoryInternational Views12107 -
Deep Learning-Based Ultrasonic Testing to Evaluate the Porosity of Additively Manufactured Parts with Rough Surfaces
Date2021.08.25 CategoryInternational Views21429 -
Analysis of the influence of surface roughness on measurement of ultrasonic nonlinearity parameter using contact-type transducer
Date2021.08.25 CategoryInternational Views504732 -
Indirect Method for Measuring Absolute Acoustic Nonlinearity Parameter Using Surface Acoustic Waves with a Fully Non-Contact Laser-Ultrasonic Technique
Date2021.08.25 CategoryInternational Views31711 -
Evaluation of yield strength by ultrasonic reconstruction of quadratic nonlinear Stress-Strain curve
Date2021.08.25 CategoryInternational Views65980 -
Ultrasonic nonlinearity parameter in uniaxial stress condition
Date2021.08.25 CategoryInternational Views42980 -
Applicability of nonlinear ultrasonic technique to evaluation of thermally aged CF8M cast stainless steel
Date2021.08.25 CategoryInternational Views7006 -
2021.07 한국비파괴검사학회 2021 춘계학술대회 우수논문발표상 (유지웅, 송동기, 장경영)
Date2021.07.20 CategoryAward Views2218 -
2021.07 한국비파괴검사학회 2021 춘계학술대회 우수논문발표상 (송동기, 장경영)
Date2021.07.20 CategoryAward Views669 -
2020.06 한국비파괴검사학회 비파괴검사학회지 우수논문상 / 2020.07 한국과학기술단체총연합회 과학기술우수논문상 (최성호,김상민,장경영)
Date2020.09.28 CategoryAward Views10761 -
2019.11 한국비파괴검사학회 2019 추계학술대회 우수논문발표상 (박성현, 홍정연, 최성호, 장경영)
Date2020.01.06 CategoryAward Views19544 -
2019.07 한국비파괴검사학회 2019 춘계학술대회 우수논문발표상 (송동기, 류주영, 홍정연, 최성호, 장경영)
Date2020.01.06 CategoryAward Views20738 -
2019.07 한국비파괴검사학회 2019 춘계학술대회 우수논문발표상 (박성현, 심명종, 최성호, 장경영)
Date2020.01.06 CategoryAward Views23063 -
Nondestructive Evaluation of Thermal Aging in Al6061 Alloy by measuring Acoustic Nonlinearity of Laser-generated Surface Acoustic Waves
Date2020.01.06 CategoryInternational Views66344 -
Stress estimation using the acoustoelastic effect of surface waves in weak anisotropic materials
Date2020.01.06 CategoryInternational Views85946 -
Comparison of Linear and Nonlinear Ultrasonic Parameters in Characterizing Grain Size and Mechanical Properties of 304L Stainless Steel
Date2020.01.06 CategoryInternational Views31004 -
Imaging and Sizing of Surface Defects Using Synthetic Aperture Focusing of Laser-generated Surface Waves
Date2020.01.06 CategoryDomestic Views34902 -
2018 산업통상자원부장관 위촉장
Date2019.06.10 CategoryAward Views29369 -
2018.11 비파괴학회 우수포스터상 (이영진,박기태,김종범,김창수,장경영)
Date2018.11.29 CategoryAward Views32355 -
2018.11 비파괴학회 우수논문발표상 (김창수,김종범,송동기,장경영)
Date2018.11.29 CategoryAward Views85731 -
Internal defect detection using laser-generated longitudinal waves in ablation regime
Date2018.11.29 CategoryInternational Views108845 -
Synthetic aperture imaging of contact acoustic nonlinearity to visualize the closing interfaces using tone-burst ultrasonic waves
Date2018.11.28 CategoryInternational Views87712 -
Variation of Acoustoelastic Effect in Al6061-T6 according to Heat Treatment Time
Date2018.11.28 CategoryDomestic Views62383 -
Dependence of Nonlinear Ultrasonic Characteristic on Second-Phase Precipitation in Heat-Treated Al 6061-T6 alloy
Date2018.11.28 CategoryInternational Views74134 -
Relative Measurement of the Acoustic Nonlinearity Parameter using Laser Detection of an Ultrasonic Wave
Date2018.06.14 CategoryInternational Views100110 -
A Method to Estimate the Absolute Ultrasonic Nonlinearity Parameter from Relative Measurements
Date2018.06.14 CategoryInternational Views86795 -
Finite element analysis of a low-velocity impact test for glass fiber-reinforced polypropylene composites considering mixed-mode interlaminar fracture toughness
Date2018.06.14 CategoryInternational Views99127 -
2017년 비파괴검사학회지 우수논문발표상 (하홍필, 김종범, 장경영)
Date2018.02.01 CategoryAward Views50050 -
2017 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 전지현 (박사과정)
Date2017.03.23 CategoryAward Views61928 -
2017 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 서호건 (박사과정)
Date2017.03.23 CategoryAward Views64634 -
2016년 비파괴검사학회지 우수논문발표상 (박성현, 김종범, 이주호, 장경영)
Date2017.02.28 CategoryAward Views65770 -
Assessment of Thermal Degradation by Cumulative Variation of Ultrasonic Nonlinear Parameter
Date2017.01.16 CategoryInternational Views207687 -
Assessment of Thermal Aging of Aluminum Alloys by Acoustic Nonlinearity Measurement of Surface Acoustic Waves
Date2017.01.16 CategoryInternational Views124094 -
Absolute Measurement and Relative Measurement of Ultrasonic Nonlinear Parameter
Date2017.01.16 CategoryInternational Views302947 -
Experimental Comparison of Nonlinear Parameters Obtained from Absolute Measurement and Relative Measurement
Date2017.01.16 CategoryInternational Views167983 -
Comparison of Ultrasonic Nonlinear Parameters Measured by PZT and LiNbO3 Transducers
Date2017.01.16 CategoryInternational Views140204 -
KSME-SEMES 오픈 이노베이션 챌린지 동상 수상 - 윤성희
Date2016.12.21 CategoryAward Views69542 -
2016 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 전지현 (석박사통합과정)
Date2016.09.09 CategoryAward Views67080 -
2016 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 서호건 (박사과정)
Date2016.04.09 CategoryAward Views65102 -
JMST - JMST Contribution Award
Date2016.02.23 CategoryAward Views66225 -
Nanotribological and wetting performance of hierarchical patterns
Date2016.02.23 CategoryInternational Views123445 -
2015 산업부장관 표창
Date2015.12.08 CategoryAward Views67609 -
Demonstration of Disturbance Propagation and Amplification in Car-Following Situation for Enhancement of Vehicle Platoon System
Date2015.09.16 CategoryInternational Views147578 -
Relative Measurement of Acoustic Nonlinear Parameters and Comparison of Sensitivity to Thermal Aging
Date2015.09.16 CategoryInternational Views117521 -
Non-contact Measurement of Elastic Modulus by using Laser Ultrasonic
Date2015.09.16 CategoryInternational Views232087 -
Relationship between Second- and Third-order Acoustic Nonlinear Parameters in Relative Measurement
Date2015.09.16 CategoryInternational Views138518 -
Non-Contact Evaluation of Acoustic Nonlinearity of a Laser-Generated Surface Wave in a Plastically Deformed Aluminum Alloy
Date2015.09.16 CategoryInternational Views160029 -
Influence of repetitive pulsed laser irradiation on the surface characteristics of an aluminum alloy in the melting regime
Date2015.09.16 CategoryInternational Views280958 -
Real-time detection of surface cracks on silicon wafers during laser beam irradiation
Date2015.09.16 CategoryInternational Views249444 -
High power CW laser-induced damage of CMOS image sensor
Date2015.09.16 CategoryDomestic Views97760 -
Measurement of Ultrasonic Nonlinear Parameter by Using Non-Contact Ultrasonic Receiver
Date2015.09.16 CategoryDomestic Views96824 -
Study on the Nonlinear Electromagnetic Acoustic Resonance Method for the Evaluation of Hidden Damage in a Metallic Material
Date2015.09.16 CategoryDomestic Views95811 -
Influence of laser beam profiles on the frequency bandwidth of laser-generated surface acoustic waves
Date2015.09.16 CategoryInternational Views121857 -
Laser ultrasonic inspection in ablation regime
Date2015.09.16 CategoryInternational Views132373 -
Improvement of Crack Sizing Performance by using Nonlinear Ultrasonic Technique
Date2015.09.16 CategoryInternational Views104076 -
대한기계학회 - 우수 학생 논문상
Date2015.09.16 CategoryAward Views66696 -
비파괴검사학회지 - 우수논문상
Date2015.09.15 CategoryAward Views67795 -
한국도로공사 교통데이터 공모전 - 대한교통학회 회장상 수상 (김진수)
Date2014.10.15 CategoryAward Views114440 -
In-Line Ultrasonic Monitoring for Sediments Stuck on Inner Wall of a Polyvinyl Chloride Pipe
Date2014.09.29 CategoryInternational Views129243 -
In situ detection of laser-induced slip initiation on the silicon wafer surface
Date2014.09.29 CategoryInternational Views104263 -
Initiation time of near-infrared laser-induced slip on the surface of silicon wafers
Date2014.09.29 CategoryInternational Views112290 -
Evaluation of Ultrasonic Nonlinear Characteristics in Artificially Aged Al6061-T6
Date2014.09.29 CategoryDomestic Views121836 -
Simulations for Internal Defect Inspection using Laser Generated Ultrasonic Wave in Ablation Regime
Date2014.09.29 CategoryDomestic Views128117 -
Slip damage of silicon wafers subjected to continuous infrared laser irradiation
Date2014.09.29 CategoryInternational Views105404 -
Thermal damages on the surface of a silicon wafer induced by a near-infrared laser
Date2014.09.29 CategoryInternational Views637521 -
Feasibility of MFC (Macro-Fiber Composite) Transducers for Guided Wave Technique
Date2014.09.29 CategoryDomestic Views222398 -
Initial Second Harmonic Generation in Narrowband Surface Waves by Multi-Line Laser Beams for Two Kinds of Spatial Energy Profile Models
Date2014.09.29 CategoryDomestic Views125703 -
Evaluation of Ultrasonic Nonlinear Characteristics in Heat-Treated Aluminum Alloy
Date2014.09.29 CategoryDomestic Views118643 -
A6061 합금의 석출경화 열처리에 따른 탄성파의 음향 특성 연구
Date2014.09.29 CategoryDomestic Views124318 -
비파괴검사학회지 - 우수 논문상
Date2014.09.29 CategoryAward Views71610 -
한국ITS학회 - 우수논문상
Date2014.09.29 CategoryAward Views77760 -
Crack Detection in Single-Crystalline Silicon Wafer Using Laser Generated Lamb Wave
Date2014.03.05 CategoryInternational Views139307 -
Evaluation of Ultrasonic Nonlinear Characteristics in Heat-Treated Aluminum Alloy (Al-Mg-Si-Cu)
Date2014.03.05 CategoryInternational Views191752 -
Application of Macrofiber Composite for Smart Transducer of Lamb Wave Inspection
Date2014.03.05 CategoryInternational Views106246 -
Thermal Damage Characterization of Silicon Wafer Subjected to CW Laser Beam
Date2014.03.05 CategoryDomestic Views104307 -
Imaging of contact acoustic nonlinearity using synthetic aperture technique
Date2014.03.05 CategoryInternational Views120717 -
Feasibility of MFC (Macro-Fiber Composite) Transducers for Guided Wave Technique
Date2014.03.05 CategoryDomestic Views111629 -
Initial Second Harmonic Generation in Narrowband Surface Waves by Multi-Line Laser Beams for Two Kinds of Spatial Energy Profile
Date2014.03.05 CategoryDomestic Views132042