댓글 0조회 수 92192추천 수 0
?

단축키

이전 문서

다음 문서

+ - Up Down Comment Print
?

단축키

이전 문서

다음 문서

+ - Up Down Comment Print

http://www.tandfonline.com/doi/pdf/10.1080/09349847.2016.1174322



Absolute Measurement and Relative Measurement of Ultrasonic Nonlinear Parameters Jongbeom Kim a , Dong-Gi Song a , and Kyung-Young Jhang b a 

Department of Mechanical Convergence Engineering, Hanyang University, Seoul, South Korea; b School of Mechanical Engineering, Hanyang University, Seoul, South Korea 


ABSTRACT The ultrasonic nonlinear parameter is measured from the amplitudes of the harmonic frequency components generated during the propagation of ultrasonic waves in a material. There are two definitions for this parameter: absolute and relative. The absolute parameter is defined by the displacement amplitude; however, it is difficult to measure because of the very small displacement amplitude of the harmonic components. Conversely, the relative parameter is defined by the amplitude of the detected signal, regardless of displacement. Many researchers use the relative parameter because it is easier to measure, although it is only available for a relative comparison of different materials. However, it has not yet been verified that the ratio of the relative parameters between two materials is identical to that of the absolute parameters. In this study, we make it clear that the ratio of the relative parameters is inherently not identical to that of the absolute parameters, but that they can be identical to each other by compensating for material-dependent differences, such as detection-sensitivity and wavenumber. For verification, the absolute and relative parameters were measured for two different materials. The results showed that the ratios of absolute and relative parameters were in good agreement after compensation. KEYWORDS Al6061-T6; absolute parameter; fused silica; relative parameter; ultrasonic nonlinear p


분류 제목 조회 수
International A Novel Method for Distance and Relative Velocity Measurement in Rear-End Collision Warning System     103274
International Evaluation of material degrading using nonlinear acoustic effect     99560
International Application of Nonlinear Ultrasonics to the NDE of Material Degradation     102757
International Estimation of Nonlinear Acoustic Parameter Using Bispectral Analysis     98883
International Research on the Nondestructive Measurement of Nonlinear Elastic Modulus by using Ultrasonic Wave     100349
International Finite Difference Method Analysis of Ultrasonic Nonlinearity in Partially Degraded Material     98260
International Detection of Lane Curve Direction by using Image Processing Based on Neural Network and Featrure Extraction     96144
International Wavelet analysis based deconvolution to improve the resolution of scanning acoustic microscope images for the inspection of thin die layer in semiconductor     104391
International A nondestructive method for estimation of the fracture toughness of CrMoV rotor steels based on ultrasonic nonlinearity     103676
International A lane-curve detection based on an LCF     102893
International Automatic Non-Contact Defect Inspection of Cylindrical Shell Using a Laser-Ultrasonic Technique     102531
International "Study on the Development of Multi-Path Ultrasonic Gas Flow Meter"     109569
International Detection of Micro-Delamination in Electronic Packaging by Using the Ultrasonic Nonlinearity     100695
International Imaging of Defects in Thin Plate by Scanning of Laser-generated Focused-Lamb Waves     100498
International Nonlinear Ultrasonic Method to Detect Micro-delamination in Electronic Packaging     104203
International Reliability Evaluation of Hinges Used in Electronic Communication Devices     102348
International Automatic Inspection of Pipe using Non-contact Guided-wave Technique with Enhanced Mode-selectivity     103107
International A noncontact NDE method using a laser generated focused-Lamb wave with enhanced defect-detection ability and spation resolution     101810
International The Detection and Imaging of Internal Defect Using ESPI-Based strain Analysis     104593
International Ultrasonic Estimation of Clamping Force in High-Tension Bolts     102836
Board Pagination ‹ Prev 1 2 3 4 5 Next ›
/ 5
Designed by hikaru100

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소

SketchBook5,스케치북5

SketchBook5,스케치북5

SketchBook5,스케치북5

SketchBook5,스케치북5

ISNDE Laboratory
203-2,Engineering Center Annex
Hanyang University,
222 Wangsimni-ro, Seongdong-gu
Seoul 04763, Korea
04763 서울특별시 성동구 왕십리로 222
한양대학교 공업센터 별관 203-2호
지능계측 및 비파괴평가 연구실
Tel: 02 - 2220 - 4220
Fax: 02 - 2299 - 7207