Influence of repetitive pulsed laser irradiation on the surface characteristics of an aluminum alloy in the melting regime
http://link.springer.com/article/10.1007%2Fs12206-014-1131-1
Influence of repetitive pulsed laser irradiation on the surface characteristics of an aluminum alloy in the melting regime
Abstract
We have investigated the influence of repetitive near-infrared (NIR) pulsed laser shots in the melting regime on the surface characteristics of an aluminum 6061-T6 alloy. Characteristics of interest include surface morphology, surface roughness, and surface hardness in the melted zone as well as the size of the melted zone. For this study, the proper pulse energy for inducing surface melting at one shot is selected using numerical simulations that calculate the variation in temperature at the laser beam spot for various input pulse energies in order to find the proper pulse energy for raising the temperature to the melting point. In this study, 130 mJ was selected as the input energy for a Nd:YAG laser pulse with a duration of 5 ns. The size of the melted zone measured using optical microscopy (OM) increased logarithmically with an increasing shot number. The surface morphology observed by scanning electron microscopy (SEM) clearly showed a re-solidified microstructure evolution after surface melting. The surface roughness and hardness were measured by atomic force microscopy (AFM) and nano-indentation, respectively. The surface roughness showed almost no variation due to the surface texturing after laser shots over 10. The hardness inside the melted zone was lower than that outside the zone because the β″ phase was transformed to a β phase or dissolved into a matrix.
Keywords
Near-infrared pulsed laser Aluminum alloy Melting Surface morphology Surface roughness Surface hardness-
인듐안티모나이드(InSb) 소자를 이용한 적외선 방사온도 계측시스템의 개발 연구
-
바이스펙트럼 해석을 이용한 혈관의 비선형 맥동전파특성 계측
-
"ASV를 위한 차량 탑재용 거리 계측 기술"
-
"음속의 응력의존성을 이용한 재 료 상태평가에 대한 기초적 연구"
-
"도플러 방식과 헤테로다인 방식의 광간섭법을 병용한 절대높이 측정 정밀도 향상"
-
"2차원 초음파 회절격자를 이용한 음향-광 3차상관기의 구성"
-
"부르돈관의 가공정밀도 향상에 관한 연구"
-
"머신비젼을 이용한 SMD VR의 중심위치와 홈방향 정밀계측"
-
"6WD/6WS군용차량의 동역학적 성능해석"
-
"전기구동 특수차량의 제동 조향 성능 해석"
-
전파속도를 알 수 없는 재료에서의 AE 발생위치 온라인 측정
-
"수박에서의 초음파 전파 특성에 관한 실험적 연구"
-
"Machine Vision을 이용한 차선 및 차량거리 검출"
-
"차선의 회전 방향 인식을 위한 신경회로망 응용 화상처리"
-
"음향 비선형 파라미터의 추정을 위한 바이스펙트럼 해석법의 적용"
-
PSD를 이용한 AFM용 미세 탐촉자의 변위측정장치
-
마이켈슨 간섭계를 이용한 레이저 여기 초음파의 검출
-
초음파주사현미경의 분해능 향상을 위한 중첩된 펄스에코 신호의 분리기법(디컨볼루션과 웨이브렛 변환의 혼합기법)
-
비선형 응향효과에 의한 고온재료의 파괴인성 열화도 평가
-
"웨이브렛 변환을 이용한 초음파 펄스 에코신호의 디컨볼루션"