International
2014.09.29 13:43
Thermal damages on the surface of a silicon wafer induced by a near-infrared laser
댓글 0조회 수 637733추천 수 0
http://opticalengineering.spiedigitallibrary.org/article.aspx?articleid=1813918
Materials, Photonic Devices, And Sensors
Thermal damages on the surface of a silicon wafer induced by a near-infrared laser
Opt. Eng. 53(1), 017103 (Jan 10, 2014). doi:10.1117/1.OE.53.1.017103
History: Received September 6, 2013; Revised November 13, 2013; AcceptedDecember 16, 2013
Abstract. Laser-induced thermal damages of a silicon wafer surface subjected to continuous near-infrared laser irradiation were investigated. Silicon wafer specimens were illuminated by a continuous-wave fiber laser beam (1070-nm wavelength) with irradiances from 93 to 186 W/cm2 , and the surface morphology of each specimen was analyzed using optical microscopy. With increasing irradiance, straight cracks in the <110> direction appeared first, and partial melting and complete melting were subsequently observed. The mechanism of these laser-induced thermal damages in the silicon wafer surface was discussed with numerical analysis based on the heat transfer and thermoelasticity model. The irradiances initiating the cracking and melting were predicted by determining the irradiances in which the calculated thermal stress and temperature exceeded the corresponding limits of the fracture strength and melting point, respectively. These predictions agreed well with the experimental findings. Laser-induced thermal damages of the silicon wafer surface subjected to a continuous near-infrared laser irradiation were identified based on these investigations.
-
Full-range stress–strain curve estimation of aluminum alloys using machine learning-aided ultrasound
Date2024.03.19 CategoryInternational Views35 -
Nondestructive Inspection of Directed Energy Deposited Components Using Scanning Acoustic Microscopy with Metalworking Fluids
Date2024.03.19 CategoryInternational Views31 -
Nondestructive Inspection of Cylindrical Components Repaired Via Directed Energy Deposition Using Scanning Acoustic Microscopy with Metal Lubricants
Date2024.03.19 CategoryInternational Views190 -
Plastic properties estimation of aluminum alloys using machine learning of ultrasonic and eddy current data
Date2024.03.19 CategoryInternational Views66 -
Calibration method using a narrowband signal for measurement of the acoustic nonlinearity parameter
Date2024.03.19 CategoryInternational Views30 -
Comparisons of second- and third-order ultrasonic nonlinearity parameters measured using through-transmission and pulse-echo methods
Date2022.11.15 CategoryInternational Views2467 -
In-situ and Layer-by-layer Grain Size Estimation of Additively Manufactured Metal Components using Femtosecond Laser Ultrasonic Technique (Submitted)
Date2022.02.21 CategoryInternational Views953 -
Microstructural Characterization of Additively Manufactured Metal Components Using Linear and Nonlinear Ultrasonic Techniques
Date2022.02.21 CategoryInternational Views1273 -
Tensile properties evaluation of additively manufactured Ti-6Al-4V/yttria-stabilized zirconia composite using absolute nonlinear-ultrasonic technique (Submitted)
Date2022.02.21 CategoryInternational Views12461 -
Generation and Measurement of Gigahertz Ultrasonic Waves in Additively Manufactured Thin Metal Components using Femtosecond Laser and Application to In-situ Grain size Monitoring (Submitted)
Date2022.02.21 CategoryInternational Views26200 -
Porosity evaluation of additive manufactured parts: ultrasonic testing and eddy current testing
Date2021.08.25 CategoryDomestic Views124171 -
Nondestructive evaluation of micro-oxide inclusions in additively manufactured metal parts using nonlinear ultrasonic technique
Date2021.08.25 CategoryInternational Views20084 -
Mechanical properties estimation of additively manufactured metal components using femtosecond laser ultrasonics and laser polishing
Date2021.08.25 CategoryInternational Views28927 -
Experimental Verification of Contact Acoustic Nonlinearity at Rough Contact Interfaces
Date2021.08.25 CategoryInternational Views49940 -
Compensation of a Second Harmonic Wave Included in an Incident Ultrasonic Wave for the Precise Measurement of the Acoustic Nonlinearity Parameter
Date2021.08.25 CategoryInternational Views45557 -
Measurement of Absolute Acoustic Nonlinearity Parameter Using Laser-Ultrasonic Detection
Date2021.08.25 CategoryInternational Views43181 -
Rapid Molecular Diagnostic Sensor Based on Ball-Lensed Optical Fibers
Date2021.08.25 CategoryInternational Views36390 -
Porosity Evaluation of Additively Manufactured Components Using Deep Learning‑based Ultrasonic Nondestructive Testing (Editor's pick)
Date2021.08.25 CategoryInternational Views12109 -
Deep Learning-Based Ultrasonic Testing to Evaluate the Porosity of Additively Manufactured Parts with Rough Surfaces
Date2021.08.25 CategoryInternational Views21456 -
Analysis of the influence of surface roughness on measurement of ultrasonic nonlinearity parameter using contact-type transducer
Date2021.08.25 CategoryInternational Views505409