Initiation time of near-infrared laser-induced slip on the surface of silicon wafers
http://scitation.aip.org/content/aip/journal/apl/104/25/10.1063/1.4885385
F
ABSTRACT
We have determined the initiation time of laser-induced slip on a silicon wafer surface subjected to a near-infrared continuous-wave laser by numerical simulations and experiments. First, numerical analysis was performed based on the heat transfer and thermoelasticity model to calculate the resolved shear stress and the temperature-dependent yield stress. Slip initiation time was predicted by finding the time at which the resolved shear stress reached the yield stress.Experimentally, the slip initiation time was measured by using a laser scattering technique that collects scattered light from the silicon wafer surface and detects strong scattering when thesurface slip is initiated. The surface morphology of the silicon wafer surface after laser irradiationwas also observed using an optical microscope to confirm the occurrence of slip. The measuredslip initiation times agreed well with the numerical predictions.
-
Non-contact Single-Mode Guided Wave Technique by the Combination of Wavelength-Matched Laser Generation and Angle-Matched Leak Wave Detection
-
Non-contact Measurement of Elastic Modulus by using Laser Ultrasonic
-
Non-Contact Evaluation of Acoustic Nonlinearity of a Laser-Generated Surface Wave in a Plastically Deformed Aluminum Alloy
-
NDE of low-velocity impact damages in composite laminates using ESPI, digital shearography and ultrasound C-scan techniques
-
Nanotribological and wetting performance of hierarchical patterns
-
Microstructural Characterization of Additively Manufactured Metal Components Using Linear and Nonlinear Ultrasonic Techniques
-
Mechanical properties estimation of additively manufactured metal components using femtosecond laser ultrasonics and laser polishing
-
Measurement of Ultrasonic Nonlinear Parameter by Using Non-Contact Ultrasonic Receiver
-
Measurement of Absolute Acoustic Nonlinearity Parameter Using Laser-Ultrasonic Detection
-
Long-Term Aging Diagnosis of Rotor Steel Using Acoustic Nonlinearity
-
Laser ultrasonic inspection in ablation regime
-
Internal defect detection using laser-generated longitudinal waves in ablation regime
-
Initiation time of near-infrared laser-induced slip on the surface of silicon wafers
-
Initial Second Harmonic Generation in Narrowband Surface Waves by Multi-Line Laser Beams for Two Kinds of Spatial Energy Profile Models
-
Initial Second Harmonic Generation in Narrowband Surface Waves by Multi-Line Laser Beams for Two Kinds of Spatial Energy Profile
-
Influence of slit width on harmonic generation in ultrasonic surface waves excited by masking a laser beam with a line arrayed slit
-
Influence of repetitive pulsed laser irradiation on the surface characteristics of an aluminum alloy in the melting regime
-
Influence of laser beam profiles on the frequency bandwidth of laser-generated surface acoustic waves
-
Indirect Method for Measuring Absolute Acoustic Nonlinearity Parameter Using Surface Acoustic Waves with a Fully Non-Contact Laser-Ultrasonic Technique
-
In-situ and Layer-by-layer Grain Size Estimation of Additively Manufactured Metal Components using Femtosecond Laser Ultrasonic Technique (Submitted)