Slip damage of silicon wafers subjected to continuous infrared laser irradiation
http://www.sciencedirect.com/science/article/pii/S1567173914001072
Volume 14, Issue 6, June 2014, Pages 843–849
Slip damage of silicon wafers subjected to continuous infrared laser irradiation
Highlights
- •
We investigate the laser irradiance inducing slip damage in a silicon wafer.
- •
We develop a simulation model to predict the slip damage.
- •
The model calculates the resolved shear stress and the temperature.
- •
The slipping irradiance predicted by simulation agrees well with the experiments.
Abstract
Laser irradiation can cause damage to solids, such as slipping, cracking, melting, and ablation. Silicon crystals are brittle, so slipping is a serious problem because it can easily result in fracture. This study investigates the amount of continuous near-infrared (NIR) laser irradiance that induces slip damage in a single-crystal silicon wafer. For this purpose we developed a simulation model based on heat transfer and thermo-elastic analyses. To verify the simulation model, silicon wafer specimens were irradiated by a fiber laser beam (of wavelength 1065 nm), and the surface morphology after laser beam irradiation was inspected using optical microscopy (OM). The irradiation time was fixed at 10 s, and nine different irradiances from 180 W/cm2 to 380 W/cm2 were tested in steps of 25 W/cm2. No slip surface was found after exposure to the irradiances up to 230 W/cm2, but straight slips in the <110> direction appeared at the irradiances of 255 W/cm2 and above. These experimental findings agreed well with the simulation.
Keywords
- Infrared laser;
- Silicon wafer;
- Thermal stress;
- Slip damage
- 비파괴검사학회지 우수 논문상 (김정석, 남태형, 최성호, 장경영)
- Best Student Poster Presentation Award: FIRST PRIZE, 9th FEOFS (Sung-ho Choi)
- 한국ITS학회 - 우수논문상
- 비파괴검사학회지 - 우수 논문상
- Slip damage of silicon wafers subjected to continuous infrared laser irradiation
- Initiation time of near-infrared laser-induced slip on the surface of silicon wafers
- 한국도로공사 교통데이터 공모전 - 대한교통학회 회장상 수상 (김진수)
- 비파괴검사학회지 - 우수논문상
- 대한기계학회 - 우수 학생 논문상
- Non-Contact Evaluation of Acoustic Nonlinearity of a Laser-Generated Surface Wave in a Plastically Deformed Aluminum Alloy
- Relationship between Second- and Third-order Acoustic Nonlinear Parameters in Relative Measurement
- 2015 산업부장관 표창
- JMST - JMST Contribution Award
- 2016 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 서호건 (박사과정)
- 2016 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 전지현 (석박사통합과정)
- KSME-SEMES 오픈 이노베이션 챌린지 동상 수상 - 윤성희
- 2016년 비파괴검사학회지 우수논문발표상 (박성현, 김종범, 이주호, 장경영)
- 2017 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 서호건 (박사과정)
- 2017 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 전지현 (박사과정)
- 2017년 비파괴검사학회지 우수논문발표상 (하홍필, 김종범, 장경영)
- Finite element analysis of a low-velocity impact test for glass fiber-reinforced polypropylene composites considering mixed-mode interlaminar fracture toughness
- A Method to Estimate the Absolute Ultrasonic Nonlinearity Parameter from Relative Measurements
- Relative Measurement of the Acoustic Nonlinearity Parameter using Laser Detection of an Ultrasonic Wave
- 2018 산업통상자원부장관 위촉장
- 2020.06 한국비파괴검사학회 비파괴검사학회지 우수논문상 / 2020.07 한국과학기술단체총연합회 과학기술우수논문상 (최성호,김상민,장경영)
- 2021.07 한국비파괴검사학회 2021 춘계학술대회 우수논문발표상 (송동기, 장경영)
- 2021.07 한국비파괴검사학회 2021 춘계학술대회 우수논문발표상 (유지웅, 송동기, 장경영)