Ultrasonic nonlinearity parameter in uniaxial stress condition
Ultrasonic nonlinearity parameter in uniaxial stress condition
https://www.sciencedirect.com/science/article/pii/S0041624X18304517
-
회절초음파를 이용한 노치 피로균열의 균열깊이 평가
-
혼합 자기 조립 단분자막의 마이크로/나노 응착 및 마찰 특성
-
협대역 레이저 여기 표면파의 음향비선형성을 이용한 Al6061 합금의 굽힘피로손상 평가
-
한국도로공사 교통데이터 공모전 - 대한교통학회 회장상 수상 (김진수)
-
한국ITS학회 - 우수논문상
-
표면파의 음향 비선형성과 실험적 특성 검증
-
표면파의 음향 비선형 특성을 이용한 표면 피로열화 평가
-
펄스형 초음파 신호에서 비선형 파라미터의 정밀추정
-
펄스레이저 조사후 알루미늄 합금의 표면상태에 대한 표면거칠기 영향
-
판재의 초음파 비선형 특성평가를 위한 Lamb Wave 기법
-
초음파주사현미경의 분해능 향상을 위한 중첩된 펄스에코 신호의 분리기법(디컨볼루션과 웨이브렛 변환의 혼합기법)
-
초음파의 비선형 특성을 이용한 미세균열 평가
-
초음파원자현미경 캔틸레버의 동특성 해석과 탄성특성 평가
-
초음파를 이용한 반도체의 신뢰성 평가
-
초음파를 이용한 기체 유동장내 분진 모니터링
-
초음파를 이용한 감자의 내부결함검사
-
초음파 비선형 전파특성을 이용한 부분 열화 재료의 평가
-
초음파 가스 유량계 개발과 활용
-
초음파 가스 유량계 개발 연구
-
접촉식 탐촉자를 이용한 초음파 비선형 파라미터의 측정에서 시스템에 의존하는 고조파 성분의 영향
-
접촉계면 반사 초음파의 음향 비선형 특성
-
전파속도를 알 수 없는 재료에서의 AE 발생위치 온라인 측정
-
자동 초점 기법을 이용한 유리 내부 결함 검출
-
인듐안티모나이드(InSb) 소자를 이용한 적외선 방사온도 계측시스템의 개발 연구
-
이미지 좌표계상의 차선모델을 이용한 차선 휨 검출
-
음향재료신호를 이용한 강소성변형된 알루미늄 5052 합금의 탄성계수 측정
-
음탄성법을 이용한 고장력 볼트의 축응력 평가
-
열처리된 SA508 합금에서의 초음파 비선형성 측정:결정립과 석출물 영향
-
스트레오비전을 이용한 전차선 높이 및 편위 정밀 측정
-
선배열 슬릿마스크를 이용한 협대역 레이저 여기 표면파의 음향 비선형성
-
비파괴검사학회지 우수 논문상 (김정석, 남태형, 최성호, 장경영)
-
비파괴검사학회지 - 우수논문상
-
비파괴검사학회지 - 우수 논문상
-
비선형 응향효과에 의한 고온재료의 파괴인성 열화도 평가
-
반복적인 펄스 레이저 조사에의한 알루미늄 합금의 표면상태 변화분석
-
바이스펙트럼 해석을 이용한 혈관의 비선형 맥동전파특성 계측
-
모드선택성을 강화한 비접촉식 유도초음파 기술
-
마이켈슨 간섭계를 이용한 레이저 여기 초음파의 검출
-
링배열 펄스레이저 조사에 의한 파장매칭형 배관 유도초음파의 비접촉 발생과 검출
-
레이저에 의한 집속형 램파의 집속도 향상을 위한 원호형 슬릿 설계
-
레이저 여기표면파의 음향비선형성을 이용한 Al6061 합금의 소성변형평가
-
레이저 여기 램파를 이용한 항공기 판재 접합부의 비접촉식 초음파 검사
-
대한기계학회 - 우수 학생 논문상
-
고체-고체 접촉계면에서 경사입사 초음파의 반사.투과 특성분석
-
Wetting behavior and nanotribological properties of silicon nanopatterns combined with diamond-like carbon and perfluoropolyther films
-
Wavelet analysis based deconvolution to improve the resolution of scanning acoustic microscope images for the inspection of thin die layer in semiconductor
-
Variation of Acoustoelastic Effect in Al6061-T6 according to Heat Treatment Time
-
Ultrasonic nonlinearity parameter in uniaxial stress condition
-
Ultrasonic Estimation of Clamping Force in High-Tension Bolts
-
Ultrasonic Characterization for directional coarsening in nickel-base superalloy during creep exposure
-
Thermal damages on the surface of a silicon wafer induced by a near-infrared laser
-
Thermal Damage Characterization of Silicon Wafer Subjected to CW Laser Beam
-
The Nonlinearity of Guided Wave in an Elastic Plate
-
The Detection and Imaging of Internal Defect Using ESPI-Based strain Analysis
-
Tensile properties evaluation of additively manufactured Ti-6Al-4V/yttria-stabilized zirconia composite using absolute nonlinear-ultrasonic technique (Submitted)
-
Synthetic aperture imaging of contact acoustic nonlinearity to visualize the closing interfaces using tone-burst ultrasonic waves
-
SUS316L 강의 초음파 비선형 특성평가를 위한 경사입사기법
-
Surface characteristics of aluminum 6061-T6 subjected to Nd:YAG pulsed-laser irradiation
-
Study on the Nonlinear Electromagnetic Acoustic Resonance Method for the Evaluation of Hidden Damage in a Metallic Material
-
Stress estimation using the acoustoelastic effect of surface waves in weak anisotropic materials
-
SNR Improvement of AE Signal for Detection of Gas Leak from Tubes under Vibratory Environment
-
Slip damage of silicon wafers subjected to continuous infrared laser irradiation
-
Single-mode guided wave technique using ring-arrayed laser beam for thin-tube inspection
-
Simulations for Internal Defect Inspection using Laser Generated Ultrasonic Wave in Ablation Regime
-
Research on the Nondestructive Measurement of Nonlinear Elastic Modulus by using Ultrasonic Wave
-
Reliability Evaluation of Hinges Used in Electronic Communication Devices
-
Reliability Evaluation for Hinge of Folder Devices Using ESPI
-
Relative Measurement of the Acoustic Nonlinearity Parameter using Laser Detection of an Ultrasonic Wave
-
Relative Measurement of Acoustic Nonlinear Parameters and Comparison of Sensitivity to Thermal Aging
-
Relationship between Second- and Third-order Acoustic Nonlinear Parameters in Relative Measurement
-
Reflection and Transmission of Acoustic Waves Across Contact Interfaces
-
Real-time detection of surface cracks on silicon wafers during laser beam irradiation
-
Rapid Molecular Diagnostic Sensor Based on Ball-Lensed Optical Fibers
-
PSD를 이용한 AFM용 미세 탐촉자의 변위측정장치
-
Porosity Evaluation of Additively Manufactured Components Using Deep Learning‑based Ultrasonic Nondestructive Testing (Editor's pick)
-
Porosity evaluation of additive manufactured parts: ultrasonic testing and eddy current testing
-
Plastic properties estimation of aluminum alloys using machine learning of ultrasonic and eddy current data
-
Nonliner Ultrasonic Characterization of fatigue damage in sus316L alloy
-
Nonlinear Ultrasonic Techniques for Nondestructive Assessment of Micro Damage in Material : Review
-
Nonlinear Ultrasonic Method to Detect Micro-delamination in Electronic Packaging
-
Nonlinear ultrasonic characterization of thermal degradation in ferritic 2.25Cr-1Mo steel
-
NONLINEAR BEHAVIOR OF ULTRASONIC WAVE AT CRACK
-
Nondestructive Inspection of Directed Energy Deposited Components Using Scanning Acoustic Microscopy with Metalworking Fluids
-
Nondestructive Inspection of Cylindrical Components Repaired Via Directed Energy Deposition Using Scanning Acoustic Microscopy with Metal Lubricants
-
Nondestructive Evaluation of Thermal Aging in Al6061 Alloy by measuring Acoustic Nonlinearity of Laser-generated Surface Acoustic Waves
-
Nondestructive evaluation of micro-oxide inclusions in additively manufactured metal parts using nonlinear ultrasonic technique
-
Non-contact Single-Mode Guided Wave Technique by the Combination of Wavelength-Matched Laser Generation and Angle-Matched Leak Wave Detection
-
Non-contact Measurement of Elastic Modulus by using Laser Ultrasonic
-
Non-Contact Evaluation of Acoustic Nonlinearity of a Laser-Generated Surface Wave in a Plastically Deformed Aluminum Alloy
-
NDE of low-velocity impact damages in composite laminates using ESPI, digital shearography and ultrasound C-scan techniques
-
Nanotribological and wetting performance of hierarchical patterns
-
Microstructural Characterization of Additively Manufactured Metal Components Using Linear and Nonlinear Ultrasonic Techniques
-
Mechanical properties estimation of additively manufactured metal components using femtosecond laser ultrasonics and laser polishing
-
Measurement of Ultrasonic Nonlinear Parameter by Using Non-Contact Ultrasonic Receiver
-
Measurement of Absolute Acoustic Nonlinearity Parameter Using Laser-Ultrasonic Detection
-
Long-Term Aging Diagnosis of Rotor Steel Using Acoustic Nonlinearity
-
Laser ultrasonic inspection in ablation regime
-
KSME-SEMES 오픈 이노베이션 챌린지 동상 수상 - 윤성희
-
JMST - JMST Contribution Award
-
Internal defect detection using laser-generated longitudinal waves in ablation regime