Laser ultrasonic inspection in ablation regime
http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6928234&tag=1
Laser ultrasonic inspection in ablation regime
This article presents a laser-based ultrasonic technique (LBUT) in ablation regime for inspection of internal defects using the pulsed high-power laser (HPL) and two wave mixing (TWM) detector. Pulsed HPL source has been recognized as a good ultrasonic generator to overcome weakness of the conventional contact transducer in harsh environment such as high temperature and rough surface of measurement target. And TWM detecting as non-contact method was used to measure the displacement by laser ultrasonic wave. The aim of this study is to investigate transmission characteristics of laser ultrasonic to various internal defects by the fully non-contact LBUT. Experimental results for various artificial internal defects showed the usefulness of the LBUT in ablation regime in nondestructive testing (NDT) field.
Published in:
Nondestructive Evaluation/Testing (FENDT), 2014 IEEE Far East Forum on
Date of Conference:
20-23 June 2014
- Page(s):
- 66 - 68
- Print ISBN:
- 978-1-4799-4731-7
- INSPEC Accession Number:
- 14694458
- Conference Location :
- Chengdu
- DOI:
- 10.1109/FENDT.2014.6928234
- Publisher:
- IEEE
-
Nanotribological and wetting performance of hierarchical patterns
-
Demonstration of Disturbance Propagation and Amplification in Car-Following Situation for Enhancement of Vehicle Platoon System
-
Relative Measurement of Acoustic Nonlinear Parameters and Comparison of Sensitivity to Thermal Aging
-
Non-contact Measurement of Elastic Modulus by using Laser Ultrasonic
-
Relationship between Second- and Third-order Acoustic Nonlinear Parameters in Relative Measurement
-
Non-Contact Evaluation of Acoustic Nonlinearity of a Laser-Generated Surface Wave in a Plastically Deformed Aluminum Alloy
-
Influence of repetitive pulsed laser irradiation on the surface characteristics of an aluminum alloy in the melting regime
-
Real-time detection of surface cracks on silicon wafers during laser beam irradiation
-
High power CW laser-induced damage of CMOS image sensor
-
Measurement of Ultrasonic Nonlinear Parameter by Using Non-Contact Ultrasonic Receiver
-
Study on the Nonlinear Electromagnetic Acoustic Resonance Method for the Evaluation of Hidden Damage in a Metallic Material
-
Influence of laser beam profiles on the frequency bandwidth of laser-generated surface acoustic waves
-
Laser ultrasonic inspection in ablation regime
-
Improvement of Crack Sizing Performance by using Nonlinear Ultrasonic Technique
-
In-Line Ultrasonic Monitoring for Sediments Stuck on Inner Wall of a Polyvinyl Chloride Pipe
-
In situ detection of laser-induced slip initiation on the silicon wafer surface
-
Initiation time of near-infrared laser-induced slip on the surface of silicon wafers
-
Evaluation of Ultrasonic Nonlinear Characteristics in Artificially Aged Al6061-T6
-
Simulations for Internal Defect Inspection using Laser Generated Ultrasonic Wave in Ablation Regime
-
Slip damage of silicon wafers subjected to continuous infrared laser irradiation