Nondestructive Inspection of Cylindrical Components Repaired Via Directed Energy Deposition Using Scanning Acoustic Microscopy with Metal Lubricants
Nondestructive Inspection of Cylindrical Components Repaired Via Directed Energy Deposition Using Scanning Acoustic Microscopy with Metal Lubricants
https://doi.org/10.1007/s12540-023-01393-y
-
Calibration method using a narrowband signal for measurement of the acoustic nonlinearity parameter
-
Nondestructive Inspection of Directed Energy Deposited Components Using Scanning Acoustic Microscopy with Metalworking Fluids
-
Full-range stress–strain curve estimation of aluminum alloys using machine learning-aided ultrasound
-
Plastic properties estimation of aluminum alloys using machine learning of ultrasonic and eddy current data
-
Nondestructive Inspection of Cylindrical Components Repaired Via Directed Energy Deposition Using Scanning Acoustic Microscopy with Metal Lubricants
-
2021.12 한국비파괴검사학회 2021 추계학술대회 우수논문발표상 (방성준, 송동기, 장경영)
-
2021.12 한국비파괴검사학회 2021 추계학술대회 우수논문발표상 (한희진, 장경영)
-
2022.11 한국비파괴검사학회 2022 추계학술대회 우수논문발표상 (유지웅, 송동기, 장경영)
-
2021.07 한국비파괴검사학회 2021 춘계학술대회 우수논문발표상 (송동기, 장경영)
-
2022 산업과학연구소 우수논문상 (박성현)
-
IJPEM-GT 저널지 편집장 우수논문 선정 (박성현)
-
In-situ and Layer-by-layer Grain Size Estimation of Additively Manufactured Metal Components using Femtosecond Laser Ultrasonic Technique (Submitted)
-
Microstructural Characterization of Additively Manufactured Metal Components Using Linear and Nonlinear Ultrasonic Techniques
-
2021.07 한국비파괴검사학회 2021 춘계학술대회 우수논문발표상 (유지웅, 송동기, 장경영)
-
Comparisons of second- and third-order ultrasonic nonlinearity parameters measured using through-transmission and pulse-echo methods
-
Applicability of nonlinear ultrasonic technique to evaluation of thermally aged CF8M cast stainless steel
-
2020.06 한국비파괴검사학회 비파괴검사학회지 우수논문상 / 2020.07 한국과학기술단체총연합회 과학기술우수논문상 (최성호,김상민,장경영)
-
Porosity Evaluation of Additively Manufactured Components Using Deep Learning‑based Ultrasonic Nondestructive Testing (Editor's pick)
-
Tensile properties evaluation of additively manufactured Ti-6Al-4V/yttria-stabilized zirconia composite using absolute nonlinear-ultrasonic technique (Submitted)
-
2019.11 한국비파괴검사학회 2019 추계학술대회 우수논문발표상 (박성현, 홍정연, 최성호, 장경영)
-
Nondestructive evaluation of micro-oxide inclusions in additively manufactured metal parts using nonlinear ultrasonic technique
-
2019.07 한국비파괴검사학회 2019 춘계학술대회 우수논문발표상 (송동기, 류주영, 홍정연, 최성호, 장경영)
-
Deep Learning-Based Ultrasonic Testing to Evaluate the Porosity of Additively Manufactured Parts with Rough Surfaces
-
2019.07 한국비파괴검사학회 2019 춘계학술대회 우수논문발표상 (박성현, 심명종, 최성호, 장경영)
-
Generation and Measurement of Gigahertz Ultrasonic Waves in Additively Manufactured Thin Metal Components using Femtosecond Laser and Application to In-situ Grain size Monitoring (Submitted)
-
Mechanical properties estimation of additively manufactured metal components using femtosecond laser ultrasonics and laser polishing
-
2018 산업통상자원부장관 위촉장
-
Comparison of Linear and Nonlinear Ultrasonic Parameters in Characterizing Grain Size and Mechanical Properties of 304L Stainless Steel
-
Indirect Method for Measuring Absolute Acoustic Nonlinearity Parameter Using Surface Acoustic Waves with a Fully Non-Contact Laser-Ultrasonic Technique
-
2018.11 비파괴학회 우수포스터상 (이영진,박기태,김종범,김창수,장경영)
-
Imaging and Sizing of Surface Defects Using Synthetic Aperture Focusing of Laser-generated Surface Waves
-
Rapid Molecular Diagnostic Sensor Based on Ball-Lensed Optical Fibers
-
Ultrasonic nonlinearity parameter in uniaxial stress condition
-
Measurement of Absolute Acoustic Nonlinearity Parameter Using Laser-Ultrasonic Detection
-
Compensation of a Second Harmonic Wave Included in an Incident Ultrasonic Wave for the Precise Measurement of the Acoustic Nonlinearity Parameter
-
Experimental Verification of Contact Acoustic Nonlinearity at Rough Contact Interfaces
-
2017년 비파괴검사학회지 우수논문발표상 (하홍필, 김종범, 장경영)
-
2017 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 전지현 (박사과정)
-
Variation of Acoustoelastic Effect in Al6061-T6 according to Heat Treatment Time
-
2017 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 서호건 (박사과정)
-
2016 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 서호건 (박사과정)
-
2016년 비파괴검사학회지 우수논문발표상 (박성현, 김종범, 이주호, 장경영)
-
Evaluation of yield strength by ultrasonic reconstruction of quadratic nonlinear Stress-Strain curve
-
JMST - JMST Contribution Award
-
Nondestructive Evaluation of Thermal Aging in Al6061 Alloy by measuring Acoustic Nonlinearity of Laser-generated Surface Acoustic Waves
-
대한기계학회 - 우수 학생 논문상
-
2016 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 전지현 (석박사통합과정)
-
2015 산업부장관 표창
-
비파괴검사학회지 - 우수논문상
-
KSME-SEMES 오픈 이노베이션 챌린지 동상 수상 - 윤성희
-
비파괴검사학회지 - 우수 논문상
-
Dependence of Nonlinear Ultrasonic Characteristic on Second-Phase Precipitation in Heat-Treated Al 6061-T6 alloy
-
한국ITS학회 - 우수논문상
-
비파괴검사학회지 우수 논문상 (김정석, 남태형, 최성호, 장경영)
-
2018.11 비파괴학회 우수논문발표상 (김창수,김종범,송동기,장경영)
-
Stress estimation using the acoustoelastic effect of surface waves in weak anisotropic materials
-
A Method to Estimate the Absolute Ultrasonic Nonlinearity Parameter from Relative Measurements
-
Synthetic aperture imaging of contact acoustic nonlinearity to visualize the closing interfaces using tone-burst ultrasonic waves
-
Harmonic generation of an obliquely incident ultrasonic wave in solid-solid contact interfaces
-
Best Poster Award, 3rd International Symposium on Laser Ultrasonics and Advanced Sensing (Sungho Choi)
-
Study on the Nonlinear Electromagnetic Acoustic Resonance Method for the Evaluation of Hidden Damage in a Metallic Material
-
NDE of low-velocity impact damages in composite laminates using ESPI, digital shearography and ultrasound C-scan techniques
-
Measurement of Ultrasonic Nonlinear Parameter by Using Non-Contact Ultrasonic Receiver
-
High power CW laser-induced damage of CMOS image sensor
-
EVALUATION OF FATIGUE DEGRADATION USING NONLINEAR ULTRASONICS
-
링배열 펄스레이저 조사에 의한 파장매칭형 배관 유도초음파의 비접촉 발생과 검출
-
Estimation of clamping force in high-tension bolts through ultrasonic velocity measurement
-
Finite element analysis of a low-velocity impact test for glass fiber-reinforced polypropylene composites considering mixed-mode interlaminar fracture toughness
-
스트레오비전을 이용한 전차선 높이 및 편위 정밀 측정
-
Experimental investigation of nonlinear acoustic effect at crack
-
Reliability Evaluation for Hinge of Folder Devices Using ESPI
-
Detection of Lane Curve Direction by using Image Processing Based on Neural Network and Featrure Extraction
-
Relative Measurement of the Acoustic Nonlinearity Parameter using Laser Detection of an Ultrasonic Wave
-
이미지 좌표계상의 차선모델을 이용한 차선 휨 검출
-
선배열 슬릿마스크를 이용한 협대역 레이저 여기 표면파의 음향 비선형성
-
Detection and Image Processing of Interfacial Micro-delamination in the Thin-layered Structure by Using Nonlinear Ultrasonic Effect
-
음탄성법을 이용한 고장력 볼트의 축응력 평가
-
레이저 여기 램파를 이용한 항공기 판재 접합부의 비접촉식 초음파 검사
-
IBAD로 표면개질된 실리콘 표면의 나노 트라이볼로지적 특성
-
The Nonlinearity of Guided Wave in an Elastic Plate
-
Application of the laser generated focused-Lamb wave for non-contact imaging of defects in plate
-
열처리된 SA508 합금에서의 초음파 비선형성 측정:결정립과 석출물 영향
-
IBAD 방법으로 코팅된 PTFE 박막의 마이크로/나노 응착 및 마찰 특성
-
Imaging of Defects in Thin Plate by Scanning of Laser-generated Focused-Lamb Waves
-
SNR Improvement of AE Signal for Detection of Gas Leak from Tubes under Vibratory Environment
-
레이저에 의한 집속형 램파의 집속도 향상을 위한 원호형 슬릿 설계
-
Improvement of Crack Sizing Performance by using Nonlinear Ultrasonic Technique
-
비선형 응향효과에 의한 고온재료의 파괴인성 열화도 평가
-
Research on the Nondestructive Measurement of Nonlinear Elastic Modulus by using Ultrasonic Wave
-
In situ detection of laser-induced slip initiation on the silicon wafer surface
-
Thermal Damage Characterization of Silicon Wafer Subjected to CW Laser Beam
-
Estimation of Nonlinear Acoustic Parameter Using Bispectral Analysis
-
NONLINEAR BEHAVIOR OF ULTRASONIC WAVE AT CRACK
-
Application of Nonlinear Ultrasonics to the NDE of Material Degradation
-
Detection of Micro-Delamination in Electronic Packaging by Using the Ultrasonic Nonlinearity
-
자동 초점 기법을 이용한 유리 내부 결함 검출
-
Slip damage of silicon wafers subjected to continuous infrared laser irradiation
-
Evaluation of material degrading using nonlinear acoustic effect
-
Advanced Technologies for Estimation of Nonlinear Ultrasonic Parameter
-
Application of Macrofiber Composite for Smart Transducer of Lamb Wave Inspection