Automatic Inspection of Pipe using Non-contact Guided-wave Technique with Enhanced Mode-selectivity
.
-
Nonlinear Ultrasonic Method to Detect Micro-delamination in Electronic Packaging
-
"2.25Cr-1Mo강의 열화도 평가를 위한 비선형 음향효과 응용법"
-
A noncontact NDE method using a laser generated focused-Lamb wave with enhanced defect-detection ability and spation resolution
-
The Detection and Imaging of Internal Defect Using ESPI-Based strain Analysis
-
초음파 비선형 전파특성을 이용한 부분 열화 재료의 평가
-
A nondestructive method for estimation of the fracture toughness of CrMoV rotor steels based on ultrasonic nonlinearity
-
Analysis of Transmitted Ultrasound signals through Apples at Different Storage Times using the Continuous Wavelet Transformation
-
고체-고체 접촉계면에서 경사입사 초음파의 반사.투과 특성분석
-
Cu와 Cu-Zn 합금의 저주기피로 동안 발달한 미세조직 평가를 위한 비파괴기술
-
초음파 가스 유량계 개발 연구
-
Failure Analysis and Evalutaion of Strength Properties for Brazed Joints
-
A lane-curve detection based on an LCF
-
"Laser Generation of Focused Lamb Wave"
-
Frequency Characteristics of Surface Wave Generated by Single-Line Pulsed Laser Beam with Two Kinds of Spatial Energy Profile Models: Gaussian and Square-Like
-
표면파의 음향 비선형성과 실험적 특성 검증
-
초음파를 이용한 반도체의 신뢰성 평가
-
Long-Term Aging Diagnosis of Rotor Steel Using Acoustic Nonlinearity
-
초음파의 비선형 특성을 이용한 미세균열 평가
-
Internal defect detection using laser-generated longitudinal waves in ablation regime
-
SUS316L 강의 초음파 비선형 특성평가를 위한 경사입사기법
-
Wetting behavior and nanotribological properties of silicon nanopatterns combined with diamond-like carbon and perfluoropolyther films
-
Ultrasonic Estimation of Clamping Force in High-Tension Bolts
-
"Evaluation of Fracture Toughness Degradation of CrMoV Rotor Steels based on Ultrasonic Nonlinearity Measurements"
-
판재의 초음파 비선형 특성평가를 위한 Lamb Wave 기법
-
초음파 가스 유량계 개발과 활용
-
마이켈슨 간섭계를 이용한 레이저 여기 초음파의 검출
-
초음파를 이용한 감자의 내부결함검사
-
음향재료신호를 이용한 강소성변형된 알루미늄 5052 합금의 탄성계수 측정
-
표면파의 음향 비선형 특성을 이용한 표면 피로열화 평가
-
접촉식 탐촉자를 이용한 초음파 비선형 파라미터의 측정에서 시스템에 의존하는 고조파 성분의 영향
-
접촉계면 반사 초음파의 음향 비선형 특성
-
Acoustic Nonlinearity of Narrowband Lager-generated Surface Waves in the Bending Fatigue of Al6061 alloy.
-
"초음파의 비선형 특성을 이용한 SUS316L 재료의 피로열화 평가에 관한 연구 "
-
PSD를 이용한 AFM용 미세 탐촉자의 변위측정장치
-
Nonlinear Ultrasonic Techniques for Nondestructive Assessment of Micro Damage in Material : Review
-
혼합 자기 조립 단분자막의 마이크로/나노 응착 및 마찰 특성
-
Feasibility of MFC (Macro-Fiber Composite) Transducers for Guided Wave Technique
-
Best Student Poster Presentation Award: FIRST PRIZE, 9th FEOFS (Sung-ho Choi)
-
Initiation time of near-infrared laser-induced slip on the surface of silicon wafers
-
"음향 비선형 파라미터의 추정을 위한 바이스펙트럼 해석법의 적용"
-
반복적인 펄스 레이저 조사에의한 알루미늄 합금의 표면상태 변화분석
-
바이스펙트럼 해석을 이용한 혈관의 비선형 맥동전파특성 계측
-
Harmonic generation of an obliquely incident ultrasonic wave in solid-solid contact interfaces
-
초음파원자현미경 캔틸레버의 동특성 해석과 탄성특성 평가
-
펄스레이저 조사후 알루미늄 합금의 표면상태에 대한 표면거칠기 영향
-
한국도로공사 교통데이터 공모전 - 대한교통학회 회장상 수상 (김진수)
-
초음파를 이용한 기체 유동장내 분진 모니터링
-
"2차원 초음파 회절격자를 이용한 음향-광 3차상관기의 구성"
-
Nonlinear ultrasonic characterization of thermal degradation in ferritic 2.25Cr-1Mo steel
-
협대역 레이저 여기 표면파의 음향비선형성을 이용한 Al6061 합금의 굽힘피로손상 평가
-
"부르돈관의 가공정밀도 향상에 관한 연구"
-
CREEP CHARACTERIZATION OF SUPERALLOY IN-738 USING ULTRASONICC NONLINEARITY MEASUREMENT
-
"전기구동 특수차량의 제동 조향 성능 해석"
-
"Machine Vision을 이용한 차선 및 차량거리 검출"
-
Evaluation of Ultrasonic Nonlinear Characteristics in Heat-Treated Aluminum Alloy
-
Nonliner Ultrasonic Characterization of fatigue damage in sus316L alloy
-
레이저 여기표면파의 음향비선형성을 이용한 Al6061 합금의 소성변형평가
-
A Novel Method for Distance and Relative Velocity Measurement in Rear-End Collision Warning System
-
"머신비젼을 이용한 SMD VR의 중심위치와 홈방향 정밀계측"
-
"6WD/6WS군용차량의 동역학적 성능해석"
-
Air-coupled 트랜스듀서를 이용한 발전설비 배관에서의 유도초음파 모드 규명
-
Frequency Response of Narrowband Surface Waves Generated by Laser Beams Spatially Modulated with a Line-arrayed Slit Mask
-
Relative Measurement of Acoustic Nonlinear Parameters and Comparison of Sensitivity to Thermal Aging
-
Automatic Inspection of Pipe using Non-contact Guided-wave Technique with Enhanced Mode-selectivity
-
"음속의 응력의존성을 이용한 재 료 상태평가에 대한 기초적 연구"
-
"ASV를 위한 차량 탑재용 거리 계측 기술"
-
Reliability Evaluation of Hinges Used in Electronic Communication Devices
-
"도플러 방식과 헤테로다인 방식의 광간섭법을 병용한 절대높이 측정 정밀도 향상"
-
"차선의 회전 방향 인식을 위한 신경회로망 응용 화상처리"
-
Evaluation of Ultrasonic Nonlinear Characteristics in Heat-Treated Aluminum Alloy
-
"Study on the Development of Multi-Path Ultrasonic Gas Flow Meter"
-
초음파주사현미경의 분해능 향상을 위한 중첩된 펄스에코 신호의 분리기법(디컨볼루션과 웨이브렛 변환의 혼합기법)
-
" Bending Fatigue Evaluation of Al6061 Alloy by Laser-generated Surface Wave"
-
"웨이브렛 변환을 이용한 초음파 펄스 에코신호의 디컨볼루션"
-
Imaging of contact acoustic nonlinearity using synthetic aperture technique
-
Acoustic Nonlinearity of a Laser-Generated Surface Wave in a Plastically Deformed Aluminum Alloy
-
Evaluation of Ultrasonic Nonlinear Characteristics in Artificially Aged Al6061-T6
-
Influence of laser beam profiles on the frequency bandwidth of laser-generated surface acoustic waves
-
Nanotribological and wetting performance of hierarchical patterns
-
Automatic Non-Contact Defect Inspection of Cylindrical Shell Using a Laser-Ultrasonic Technique
-
GENERATION OF WAVELENGTH-MATCHED GUIDED WAVE IN TUBE BY ARRAYED LASER BEAM METHOD
-
회절초음파를 이용한 노치 피로균열의 균열깊이 평가
-
Assessment of Thermal Aging of Aluminum Alloys by Acoustic Nonlinearity Measurement of Surface Acoustic Waves
-
Porosity evaluation of additive manufactured parts: ultrasonic testing and eddy current testing
-
A6061 합금의 석출경화 열처리에 따른 탄성파의 음향 특성 연구
-
전파속도를 알 수 없는 재료에서의 AE 발생위치 온라인 측정
-
Experimental Characterization of Cyclic Deformation in Copper Using Ultrasonic Nonlinearity
-
Initial Second Harmonic Generation in Narrowband Surface Waves by Multi-Line Laser Beams for Two Kinds of Spatial Energy Profile Models
-
CHARACTERIZATION OF TAINLESS STEEL FIBER REINFORCED ALUMINUM COMPOSITE USING ULTRASONIC NONLINEARITY
-
Influence of slit width on harmonic generation in ultrasonic surface waves excited by masking a laser beam with a line arrayed slit
-
Simulations for Internal Defect Inspection using Laser Generated Ultrasonic Wave in Ablation Regime
-
"Development of Pressure Control System of Contact Transducer for Measurement of Ultrasonic Nonlinear Parameter "
-
In-Line Ultrasonic Monitoring for Sediments Stuck on Inner Wall of a Polyvinyl Chloride Pipe
-
Reflection and Transmission of Acoustic Waves Across Contact Interfaces
-
Ultrasonic Characterization for directional coarsening in nickel-base superalloy during creep exposure
-
Initial Second Harmonic Generation in Narrowband Surface Waves by Multi-Line Laser Beams for Two Kinds of Spatial Energy Profile
-
Laser ultrasonic inspection in ablation regime
-
펄스형 초음파 신호에서 비선형 파라미터의 정밀추정
-
Wavelet analysis based deconvolution to improve the resolution of scanning acoustic microscope images for the inspection of thin die layer in semiconductor
-
"수박에서의 초음파 전파 특성에 관한 실험적 연구"