Non-Contact Evaluation of Acoustic Nonlinearity of a Laser-Generated Surface Wave in a Plastically Deformed Aluminum Alloy
http://www.tandfonline.com/doi/abs/10.1080/09349847.2014.934496
Noncontact Evaluation of Acoustic Nonlinearity of a Laser-Generated Surface Wave in a Plastically Deformed Aluminum Alloy
- DOI:
- 10.1080/09349847.2014.934496
pages 13-22
- Accepted author version posted online: 01 Jul 2014
Abstract
A noncontact method to evaluate the acoustic nonlinearity of surface waves in a plastically deformed aluminum alloy is proposed. Line-arrayed laser beams modulated with slit masks were used for the generation of narrowband surface waves. A laser-ultrasonic detector using a two-wave mixing (TWM) approach was also employed to detect the surface waves. The specimens were deformed by a stroke-controlled tensile tester so as to generate various degrees of tensile deformation. The experimental results showed that the acoustic nonlinearity of the laser-generated surface waves increased according to the level of tensile deformation. This tendency was in good agreement with our previous results obtained using a contact piezoelectric (PZT)-transducer as the receiver. These results imply that our noncontact technique is suitable for the evaluation of acoustic nonlinearity and can be applied to practical damage assessment.
-
Non-contact Measurement of Elastic Modulus by using Laser Ultrasonic
-
Relationship between Second- and Third-order Acoustic Nonlinear Parameters in Relative Measurement
-
Non-Contact Evaluation of Acoustic Nonlinearity of a Laser-Generated Surface Wave in a Plastically Deformed Aluminum Alloy
-
Influence of repetitive pulsed laser irradiation on the surface characteristics of an aluminum alloy in the melting regime
-
Real-time detection of surface cracks on silicon wafers during laser beam irradiation
-
Influence of laser beam profiles on the frequency bandwidth of laser-generated surface acoustic waves
-
Laser ultrasonic inspection in ablation regime
-
Improvement of Crack Sizing Performance by using Nonlinear Ultrasonic Technique
-
In-Line Ultrasonic Monitoring for Sediments Stuck on Inner Wall of a Polyvinyl Chloride Pipe
-
In situ detection of laser-induced slip initiation on the silicon wafer surface
-
Initiation time of near-infrared laser-induced slip on the surface of silicon wafers
-
Slip damage of silicon wafers subjected to continuous infrared laser irradiation
-
Thermal damages on the surface of a silicon wafer induced by a near-infrared laser
-
Crack Detection in Single-Crystalline Silicon Wafer Using Laser Generated Lamb Wave
-
Evaluation of Ultrasonic Nonlinear Characteristics in Heat-Treated Aluminum Alloy (Al-Mg-Si-Cu)
-
Application of Macrofiber Composite for Smart Transducer of Lamb Wave Inspection
-
Imaging of contact acoustic nonlinearity using synthetic aperture technique
-
Influence of slit width on harmonic generation in ultrasonic surface waves excited by masking a laser beam with a line arrayed slit
-
Acoustic Nonlinearity of a Laser-Generated Surface Wave in a Plastically Deformed Aluminum Alloy
-
Analysis of Transmitted Ultrasound signals through Apples at Different Storage Times using the Continuous Wavelet Transformation