Indirect Method for Measuring Absolute Acoustic Nonlinearity Parameter Using Surface Acoustic Waves with a Fully Non-Contact Laser-Ultrasonic Technique

Admin

댓글 0조회 수 31921추천 수 0

단축키

←이전 문서

→다음 문서

가 + - Up Down Comment Print

단축키

←이전 문서

→다음 문서

가 + - Up Down Comment Print

Indirect Method for Measuring Absolute Acoustic Nonlinearity Parameter Using Surface Acoustic Waves with a Fully Non-Contact Laser-Ultrasonic Technique

https://www.mdpi.com/2076-3417/10/17/5911

« Prev Analysis of the influence of surface roughness on measurement...

Analysis of the influence of surface roughness on measurement... 2021.08.25by

Evaluation of yield strength by ultrasonic reconstruction of ... Next »

Evaluation of yield strength by ultrasonic reconstruction of ... 2021.08.25by

Category

분류	제목	조회 수
International	Full-range stress–strain curve estimation of aluminum alloys using machine learning-aided ultrasound	208
International	Nondestructive Inspection of Directed Energy Deposited Components Using Scanning Acoustic Microscopy with Metalworking Fluids	164
International	Nondestructive Inspection of Cylindrical Components Repaired Via Directed Energy Deposition Using Scanning Acoustic Microscopy with Metal Lubricants	669
International	Plastic properties estimation of aluminum alloys using machine learning of ultrasonic and eddy current data	217
International	Calibration method using a narrowband signal for measurement of the acoustic nonlinearity parameter	139
Award	2022.11 한국비파괴검사학회 2022 추계학술대회 우수논문발표상 (유지웅, 송동기, 장경영)	625
Award	2021.12 한국비파괴검사학회 2021 추계학술대회 우수논문발표상 (한희진, 장경영)	530
Award	2021.12 한국비파괴검사학회 2021 추계학술대회 우수논문발표상 (방성준, 송동기, 장경영)	500
International	Comparisons of second- and third-order ultrasonic nonlinearity parameters measured using through-transmission and pulse-echo methods	2585
Award	IJPEM-GT 저널지 편집장 우수논문 선정 (박성현)	884
Award	2022 산업과학연구소 우수논문상 (박성현)	788
International	In-situ and Layer-by-layer Grain Size Estimation of Additively Manufactured Metal Components using Femtosecond Laser Ultrasonic Technique (Submitted)	1100
International	Microstructural Characterization of Additively Manufactured Metal Components Using Linear and Nonlinear Ultrasonic Techniques	1375
International	Tensile properties evaluation of additively manufactured Ti-6Al-4V/yttria-stabilized zirconia composite using absolute nonlinear-ultrasonic technique (Submitted)	12589
International	Generation and Measurement of Gigahertz Ultrasonic Waves in Additively Manufactured Thin Metal Components using Femtosecond Laser and Application to In-situ Grain size Monitoring (Submitted)	26504
Domestic	Porosity evaluation of additive manufactured parts: ultrasonic testing and eddy current testing	124869
International	Nondestructive evaluation of micro-oxide inclusions in additively manufactured metal parts using nonlinear ultrasonic technique	20276
International	Mechanical properties estimation of additively manufactured metal components using femtosecond laser ultrasonics and laser polishing	29314
International	Experimental Verification of Contact Acoustic Nonlinearity at Rough Contact Interfaces	50322
International	Compensation of a Second Harmonic Wave Included in an Incident Ultrasonic Wave for the Precise Measurement of the Acoustic Nonlinearity Parameter	46104
International	Measurement of Absolute Acoustic Nonlinearity Parameter Using Laser-Ultrasonic Detection	43692
International	Rapid Molecular Diagnostic Sensor Based on Ball-Lensed Optical Fibers	36693
International	Porosity Evaluation of Additively Manufactured Components Using Deep Learning‑based Ultrasonic Nondestructive Testing (Editor's pick)	12256
International	Deep Learning-Based Ultrasonic Testing to Evaluate the Porosity of Additively Manufactured Parts with Rough Surfaces	21733
International	Analysis of the influence of surface roughness on measurement of ultrasonic nonlinearity parameter using contact-type transducer	510387
International	Indirect Method for Measuring Absolute Acoustic Nonlinearity Parameter Using Surface Acoustic Waves with a Fully Non-Contact Laser-Ultrasonic Technique	31921
International	Evaluation of yield strength by ultrasonic reconstruction of quadratic nonlinear Stress-Strain curve	66469
International	Ultrasonic nonlinearity parameter in uniaxial stress condition	43490
International	Applicability of nonlinear ultrasonic technique to evaluation of thermally aged CF8M cast stainless steel	7111
Award	2021.07 한국비파괴검사학회 2021 춘계학술대회 우수논문발표상 (유지웅, 송동기, 장경영)	2307
Award	2021.07 한국비파괴검사학회 2021 춘계학술대회 우수논문발표상 (송동기, 장경영)	758
Award	2020.06 한국비파괴검사학회 비파괴검사학회지 우수논문상 / 2020.07 한국과학기술단체총연합회 과학기술우수논문상 (최성호,김상민,장경영)	10876
Award	2019.11 한국비파괴검사학회 2019 추계학술대회 우수논문발표상 (박성현, 홍정연, 최성호, 장경영)	19623
Award	2019.07 한국비파괴검사학회 2019 춘계학술대회 우수논문발표상 (송동기, 류주영, 홍정연, 최성호, 장경영)	20799
Award	2019.07 한국비파괴검사학회 2019 춘계학술대회 우수논문발표상 (박성현, 심명종, 최성호, 장경영)	23147
International	Nondestructive Evaluation of Thermal Aging in Al6061 Alloy by measuring Acoustic Nonlinearity of Laser-generated Surface Acoustic Waves	66533
International	Stress estimation using the acoustoelastic effect of surface waves in weak anisotropic materials	86143
International	Comparison of Linear and Nonlinear Ultrasonic Parameters in Characterizing Grain Size and Mechanical Properties of 304L Stainless Steel	31135
Domestic	Imaging and Sizing of Surface Defects Using Synthetic Aperture Focusing of Laser-generated Surface Waves	35074
Award	2018 산업통상자원부장관 위촉장	29466
Award	2018.11 비파괴학회 우수포스터상 (이영진,박기태,김종범,김창수,장경영)	32423
Award	2018.11 비파괴학회 우수논문발표상 (김창수,김종범,송동기,장경영)	86395
International	Internal defect detection using laser-generated longitudinal waves in ablation regime	109099
International	Synthetic aperture imaging of contact acoustic nonlinearity to visualize the closing interfaces using tone-burst ultrasonic waves	88245
Domestic	Variation of Acoustoelastic Effect in Al6061-T6 according to Heat Treatment Time	62538
International	Dependence of Nonlinear Ultrasonic Characteristic on Second-Phase Precipitation in Heat-Treated Al 6061-T6 alloy	74605
International	Relative Measurement of the Acoustic Nonlinearity Parameter using Laser Detection of an Ultrasonic Wave	100418
International	A Method to Estimate the Absolute Ultrasonic Nonlinearity Parameter from Relative Measurements	86941
International	Finite element analysis of a low-velocity impact test for glass fiber-reinforced polypropylene composites considering mixed-mode interlaminar fracture toughness	99448
Award	2017년 비파괴검사학회지 우수논문발표상 (하홍필, 김종범, 장경영)	50144
Award	2017 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 전지현 (박사과정)	62033
Award	2017 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 서호건 (박사과정)	64777
Award	2016년 비파괴검사학회지 우수논문발표상 (박성현, 김종범, 이주호, 장경영)	65860
International	Assessment of Thermal Degradation by Cumulative Variation of Ultrasonic Nonlinear Parameter	208601
International	Assessment of Thermal Aging of Aluminum Alloys by Acoustic Nonlinearity Measurement of Surface Acoustic Waves	124381
International	Absolute Measurement and Relative Measurement of Ultrasonic Nonlinear Parameter	303662
International	Experimental Comparison of Nonlinear Parameters Obtained from Absolute Measurement and Relative Measurement	168751
International	Comparison of Ultrasonic Nonlinear Parameters Measured by PZT and LiNbO3 Transducers	140645
Award	KSME-SEMES 오픈 이노베이션 챌린지 동상 수상 - 윤성희	69652
Award	2016 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 전지현 (석박사통합과정)	67162
Award	2016 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 서호건 (박사과정)	65191
Award	JMST - JMST Contribution Award	66300
International	Nanotribological and wetting performance of hierarchical patterns	123697
Award	2015 산업부장관 표창	67678
International	Demonstration of Disturbance Propagation and Amplification in Car-Following Situation for Enhancement of Vehicle Platoon System	148153
International	Relative Measurement of Acoustic Nonlinear Parameters and Comparison of Sensitivity to Thermal Aging	117705
International	Non-contact Measurement of Elastic Modulus by using Laser Ultrasonic	233509
International	Relationship between Second- and Third-order Acoustic Nonlinear Parameters in Relative Measurement	139061
International	Non-Contact Evaluation of Acoustic Nonlinearity of a Laser-Generated Surface Wave in a Plastically Deformed Aluminum Alloy	160522
International	Influence of repetitive pulsed laser irradiation on the surface characteristics of an aluminum alloy in the melting regime	284060
International	Real-time detection of surface cracks on silicon wafers during laser beam irradiation	250407
Domestic	High power CW laser-induced damage of CMOS image sensor	97836
Domestic	Measurement of Ultrasonic Nonlinear Parameter by Using Non-Contact Ultrasonic Receiver	96899
Domestic	Study on the Nonlinear Electromagnetic Acoustic Resonance Method for the Evaluation of Hidden Damage in a Metallic Material	95893
International	Influence of laser beam profiles on the frequency bandwidth of laser-generated surface acoustic waves	122060
International	Laser ultrasonic inspection in ablation regime	132567
International	Improvement of Crack Sizing Performance by using Nonlinear Ultrasonic Technique	104285
Award	대한기계학회 - 우수 학생 논문상	66772
Award	비파괴검사학회지 - 우수논문상	67899
Award	한국도로공사 교통데이터 공모전 - 대한교통학회 회장상 수상 (김진수)	114556
International	In-Line Ultrasonic Monitoring for Sediments Stuck on Inner Wall of a Polyvinyl Chloride Pipe	129699
International	In situ detection of laser-induced slip initiation on the silicon wafer surface	104340
International	Initiation time of near-infrared laser-induced slip on the surface of silicon wafers	112765
Domestic	Evaluation of Ultrasonic Nonlinear Characteristics in Artificially Aged Al6061-T6	121964
Domestic	Simulations for Internal Defect Inspection using Laser Generated Ultrasonic Wave in Ablation Regime	128441
International	Slip damage of silicon wafers subjected to continuous infrared laser irradiation	105525
International	Thermal damages on the surface of a silicon wafer induced by a near-infrared laser	639847
Domestic	Feasibility of MFC (Macro-Fiber Composite) Transducers for Guided Wave Technique	224021
Domestic	Initial Second Harmonic Generation in Narrowband Surface Waves by Multi-Line Laser Beams for Two Kinds of Spatial Energy Profile Models	125803
Domestic	Evaluation of Ultrasonic Nonlinear Characteristics in Heat-Treated Aluminum Alloy	118741
Domestic	A6061 합금의 석출경화 열처리에 따른 탄성파의 음향 특성 연구	124464
Award	비파괴검사학회지 - 우수 논문상	71671
Award	한국ITS학회 - 우수논문상	77855
International	Crack Detection in Single-Crystalline Silicon Wafer Using Laser Generated Lamb Wave	139758
International	Evaluation of Ultrasonic Nonlinear Characteristics in Heat-Treated Aluminum Alloy (Al-Mg-Si-Cu)	191903
International	Application of Macrofiber Composite for Smart Transducer of Lamb Wave Inspection	106346
Domestic	Thermal Damage Characterization of Silicon Wafer Subjected to CW Laser Beam	104436
International	Imaging of contact acoustic nonlinearity using synthetic aperture technique	121300
Domestic	Feasibility of MFC (Macro-Fiber Composite) Transducers for Guided Wave Technique	111736
Domestic	Initial Second Harmonic Generation in Narrowband Surface Waves by Multi-Line Laser Beams for Two Kinds of Spatial Energy Profile	133145

태그

나눔글꼴 설치 안내

이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

✔ 설치 취소

SketchBook5,스케치북5

Impacts of Hanyang's Research :: Nondestuctive Evaluation for Future Safety